please add it to supported devices IMMAX 4in1-Senzor-ZB3.0

Hi,
3 out of 4 devices were found, PIR sensor is missing(0406)

[SwoopX]

Missed your reply. PIR is handled via IAS zone cluster.

Try the below while sensor seach is running:
Select it, weak the device and read the attributes. Thas should trigger auto-enrollment. Double check while waiting like 10 secs, then do the procedure again.

If that's still no good, double click on the IAS CIE address attribute and write the coordinator MAC address while the sensor is awake. Again, wait like 10 secs and then wake the sensor and read the attributes. If the sensor has the address previously entered but is still not enrolled, execute the command above the read button while the sensor is awake. Check once again after 10 secs.

[stale]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

[f0b04707]

I also have an Immax 4in1 device. When integrated in Phoscon App, the device is not visible in "Connected sensors" list.

The other problem is that in Home Assistant, the presence sensor does not update. The others (temperature, humidity, light) are fine though.

It seems that I'm also missing the "0406 Occupancy sensing" attribute.

If that's still no good, double click on the IAS CIE address attribute and write the coordinator MAC address while the sensor is awake. Again, wait like 10 secs and then wake the sensor and read the attributes. If the sensor has the address previously entered but is still not enrolled, execute the command above the read button while the sensor is awake. Check once again after 10 secs.

I tried to follow this procedure but it does not fix it.

Maybe an integration issue @Kane610 ?

[Kane610]

I don't think it is an integration issue, if it gets created it should also handle updates, I think deconz doesn't send updates

[f0b04707]

I don't think it is an integration issue, if it gets created it should also handle updates, I think deconz doesn't send updates

Thanks for jumping in ! If the sensor only use "IAS Zone" cluster, how is that reflected in HA vs the "0406 Occupancy sensing" ?

157
config
battery	100
duration	60
on	true
pending	[]
reachable	true
ep	1
etag	"75ec498350dd7e963cad5efa327c5225"
lastseen	"2020-07-14T12:17:01.781"
manufacturername	"Immax"
modelid	"4in1-Sensor-ZB3.0"
name	"4in1-Sensor-ZB3.0 (2)"
state
lastupdated	"2020-07-14T10:51:19.459"
lowbattery	false
presence	false
tampered	false
swversion	"20181227-76"
type	"ZHAPresence"
uniqueid	"00:0d:6f:ff:fe:40:03:56-01-0500"

[SwoopX]

The IAS Zone status is 99% still not enrolled. Has the write of the CIE address been accepted?

[f0b04707]

Seems to be:

[SwoopX]

Doesn't it work at all or just occasionally? It should take like 60 secs to jump from motion to nomotion (if there's no motion in between).

[f0b04707]

No, it does not work at all. Temperature, humidity and light are fine though. Should it be visible in the "Connected sensors" list ?

[SwoopX]

Strange. In the IAS Zone, the Alarm 1 should be ticked upon motion, but only if it's enrolled... Not sure if the device uses a different mechanism for the notifications.