[Request Device Support] Samsung SmartPlug 2019 Model ID: 7A-PL-Z-J3

[smartypantsuk]

I have just purchased a 2019 Smartthings Smart Plug which supports power monitoring.
Deconz treats it as an on/off plug and works fine in that respect, but I'd love to get power monitoring working. These plugs are a reasonable price without breaking the bank so would be brilliant if the energy side worked.

I have a feeling that these plugs could be manufacturered by Innr, but I aren't certain. The manufacturer code is 0x1168, which according to this page is an Innr reference, Innr2 to be precise Perhaps Innr use the '2' designation for products they manufacturer but release under a difference brand?..

They are almost identical to the Innr plug with size, shape and power switch location, but there are some tiny differences regarding depth and bevel at the front lip. The build quality is identical to the Innr device.

I have attached the important stuff, If i've missed anything please advise.

Model ID: 7A-PL-Z-J3

Thank you

and some debug info, in which I turned the smart plug on and off:

debug.txt

and perhaps there is some information from this smartthings github page which mentions the same model/make of ZB-ONOFFPlug-D0005 and LDS

SmartThingsPublic

[avotronics101]

I'd like this working too. I've just purchased 6 of these smartthings smart plugs to use with Homeseer via deconz. The only alternative which support energy monitoring is the Aeotec or Fibaro smart plugs but they are twice the price, around £60 each which is far too much money. The Samsung plugs support energy monitoring and cost 50% less, approx. £30. We just need to get it needed. Have you found a way yet?

[smartypantsuk]

I'd like this working too. I've just purchased 6 of these smartthings smart plugs to use with Homeseer via deconz. The only alternative which support energy monitoring is the Aeotec or Fibaro smart plugs but they are twice the price, around £60 each which is far too much money. The Samsung plugs support energy monitoring and cost 50% less, approx. £30. We just need to get it needed. Have you found a way yet?

Unfortunately I'm no programmer. We need someone else involved?

[SwoopX]

Let me see if I can help you with that. I'd definitively require your feedback regarding correct values for power and consumption...

[smartypantsuk]

Let me see if I can help you with that. I'd definitively require your feedback regarding correct values for power and consumption...

That would be great and very appreciated.
I can help you as long as I understand the question 😆

[smartypantsuk]

Let me know what you need.

Thanks

[SwoopX]

No worries. Right now, I just need a little bit of time. Keep an eye on this issue and I'll ping you once ready.

Hope you're not running on docker? It would help if you could compile the plugin and do some testing once the changes are ready. Right now, I'd say I only need some feedback if the values are plausible. If not, the divisor for calculating the consumption needs to be amended.

[smartypantsuk]

No I'm on Windows but I can get my Linux box out of the cupboard if needed

[SwoopX]

Ok, should be good to go now. You may try the version from my repo https://github.com/SwoopX/deconz-rest-plugin.

Before you do that, please provide me with screenshots for the reporting configuration from deconz GUI. In the GUI, please go to Simple Metering and double click on attribute 0x0000 (Current Summation Delivered). Then, read config. Please do the same for Electrical Measurement and attribute 0x050B.

Good luck ;)

[smartypantsuk]

I tried that unfortunately it seems to give me a NOT_FOUND message when I click on read config. I hope this doesn't mean we're out of luck? I did unlock network prior to clicking the button. I can try again tomorrow when I'm not so tired.

[SwoopX]

Just have the device paired and plugged in should suffice. I wonder that it says not found, doesn't really make sense...

However, nothing serious, I was just after the default values. We can give it pretty much what we want to have in the end.