Skip to content

markdown_v1.md

Latest commit

 

History

History
2437 lines (2001 loc) · 118 KB

markdown_v1.md

File metadata and controls

2437 lines (2001 loc) · 118 KB
Raw

zigpy-ota Firmware Index

This is a human-readable index of all OTA firmware images in the zigpy-ota repository.

Channel: dev
Total firmware images: 104 enabled + 2 disabled

aeotec

1310-0000-00000011_350c16.ota

Release Notes:

  • Modified the LED indicator status: When clicking the Action button 4 times to start finding and binding mode, if the device finding & binding is successful, the LED will flash rapidly for 2 seconds and then return to solid state.
  • Pull Request: #10

1310-0802-00000106_1f3467.ota

Release Notes:

  • Changed the Scene ID configuration for external switch S1/S2
  • Pull Request: #8

1310-0803-00000106_030d13.ota

Release Notes:

  • Changed the Scene ID configuration for external switch S1/S2
  • Pull Request: #4

1310-7C04-00000108_6d687b.ota

Release Notes:

  • Changed the Scene ID configuration for external switch S1/S2
  • Pull Request: #6

bega

1105-A0A0-00990BF2_143d97.ota

Release Notes:

Changes

  • Increased Zigbee routing table capacity to improve network scalability, communication reliability, and overall performance in larger installations
  • Improved OTA Bluetooth transfer speed, enabling faster and more efficient firmware updates
  • Pull Request: #49

develco

1015-0182-00040008_43f6cf.ota

Release Notes:

This updates the frient A/S Motion Sensor/Pro (MOSZB-141 or MOSZB-140) to v4.0.8.

Changes

  • Bug fixes
  • Pull Request: #82

1015-0183-00020008_aa5364.ota

Release Notes:

This updates the frient A/S Motion Sensor 2 Pet/Alarm (MOSZB-153 or MOSZB-156) to v2.0.8.

Changes

  • Minor improvements
  • Pull Request: #80

1015-0240-00040003_ba480a.ota

Release Notes:

This updates the frient A/S Entry Sensor/Pro (WISZB-121 or WISZB-120) to v4.0.3.

Changes

  • General improvements
  • Pull Request: #70

1015-0251-00040009_1276ed.ota

Release Notes:

This updates the frient A/S Intelligent Smoke Alarm (SMSZB-120) or Intelligent Heat Alarm (HESZB-120) to v4.0.9.

Changes

  • Have a backup image ready in external flash
  • Bug fixes
  • Pull Request: #78

1015-02E0-00030C10_c06f96.ota

Release Notes:

This updates the frient A/S Smart Plug Mini, Smart Cable, or Smart DIN Relay (SPLZB-131, SPLZB-132, SPLZB-134, SMRZB-143, or SMRZB-332) to v3.12.16.

Changes

  • Improvements to router functionality
  • Pull Request: #88

1015-02E1-00020009_547c30.ota

Release Notes:

This updates the frient A/S Smart Plug Mini 2, Smart Cable 2, or Smart DIN Relay 2 (SPLZB-141, SPLZB-144, SMRZB-153, or SMRZB-342) to v2.0.9.

Changes

  • RF performance tuning
  • Pull Request: #86

1015-0300-00040005_1fab69.ota

Release Notes:

This updates the frient A/S Water Leak Detector (FLSZB-110) to v4.0.5.

Changes

  • Have a backup image ready in external flash
  • Pull Request: #92

1015-0310-00040003_c3738d.ota

Release Notes:

This updates the frient A/S Humidity Sensor (HMSZB-110) to v4.0.3.

Changes

  • Bug fixes
  • Improved stability
  • Pull Request: #60

1015-0320-00040003_5277c4.ota

Release Notes:

This updates the frient A/S Air Quality Sensor (AQSZB-110) or Humidity Sensor (HMSZB-120) to v4.0.3.

Changes

  • Bug fixes and improvements
  • Pull Request: #58

1015-0340-00040007_cecc7d.ota [stale]

Release Notes:

This updates the frient A/S EMI Norwegian HAN (EMIZB-132) to v4.0.7.

Changes

  • Bug fixes
  • Stability improvements
  • Pull Request: #66

1015-0340-0004000A_9cd1da.ota

Release Notes:

This updates the frient A/S EMI Norwegian HAN (EMIZB-132) to v4.0.10.

Changes

  • Add support for Landis+Gyr (Embriq_V1_1)
  • Small optimizations
  • Pull Request: #217

1015-0390-00020001_fb1605.ota

Release Notes:

This updates the frient A/S IO Module (IOMZB-110) to v2.0.1.

Changes

  • General improvements
  • Pull Request: #72

1015-0391-00020004_748757.ota

Release Notes:

This updates the frient A/S Smart Button (SBTZB-110) to v2.0.4.

Changes

  • Battery measurement improvements
  • Pull Request: #84

1015-0392-00020004_30dc8e.ota

Release Notes:

This updates the frient A/S Smart Siren (SIRZB-110, SIRZB-111, or SIRZB-112) to v2.0.4.

Changes

  • General improvements
  • Pull Request: #90

1015-0393-00020006_ed2430.ota

Release Notes:

This updates the frient A/S Intelligent Keypad (KEPZB-110, KEPZB-112, KEPZB-120, or KEPZB-122) to v2.0.6.

Changes

  • Backlight improvements
  • Pull Request: #76

1015-0394-00020002_e9c6ac.ota

Release Notes:

This updates the frient A/S Zigbee Range Extender (REXZB-110 or REXZB-111) to v2.0.2.

Changes

  • Minor improvements
  • Pull Request: #94

1015-03A0-00020007_b99ca6.ota

Release Notes:

This updates the frient A/S Entry Sensor 2 Pro/Alarm (WISZB-131 or WISZB-138) or Vibration Sensor (WISZB-137) to v2.0.7.

Changes

  • General improvements
  • Pull Request: #68

1015-03D0-00030102_58826b.ota

Release Notes:

This updates the frient A/S EMI 2, LED (EMIZB-141) to v3.1.2.

Changes

  • Stability improvements
  • Pull Request: #62

1015-03D1-00030107_862fed.ota

Release Notes:

This updates the frient A/S EMI 2, P1 (EMIZB-151) to v3.1.7.

Changes

  • General improvements
  • Pull Request: #64

heiman

120B-A080-00000022_19cbfc.ota

Release Notes:

This updates the Heiman HS1SA-E-PLUS smoke alarm to firmware version 2.2.0.

Changes

  • Fixed a bug where the heartbeat LED could not be switched off in a corner case
  • Updated the model name from HS1SA-EF-3.0 to HS1SA-E-PLUS
  • Added temperature calibration attributes
  • Addressed minor bugs
  • Pull Request: #53

innr

1166-0331-191D3685_650309.ota

Release Notes:

This updates the Innr SP 240 smart plug to firmware version 1.9.29.

Note: Please reload ZHA or restart Home Assistant shortly after this update is fully applied to avoid an incorrectly increased "summation delivered" state.

Note: The relay may turn on or off during the upgrade process.

Changes compared to version 1.7.23 and older

  • Fixed attribute reporting failing after power-cycle
  • Improved default attribute reporting settings
  • Improved thresholds for the resettable voltage and current overload protection
  • Added possibility to disable voltage overload protection
  • kWh in 3 decimals instead of 2
  • Added Multiplier and Divisor for kWh
  • Various bug fixes and performance improvements

Disabling voltage overload protection

To disable voltage overload protection:

  1. Keep the button pressed between 15 and 20 seconds, then release
  2. After 5 seconds, the LED will start quick-blinking; keep the button pressed
  3. After 10 seconds, blinking stops; keep the button pressed
  4. After 15 seconds, the LED will start quick-blinking again
  5. Release the button. The LED will slow-blink 3 times to indicate success

Enable again in the same way.

Enabled/disabled state is persisted over power-cycles, even if not connected to a bridge. While voltage overload protection is disabled, every on/off action will double-blink the LED before assuming final state.

Current overload protection cannot be disabled.

Overload behavior

  • If the voltage or current overload protection triggers, the plug switches off and fast-blinks its LED
  • If the cause was voltage overload, the plug will go back to normal operation automatically when the overload condition disappears
  • If the cause was current overload, the plug will stay off and in overload condition until manually operated, either with the button or by power-cycling
  • Pull Request: #12

1166-0332-191D3685_9f8062.ota

Release Notes:

This updates the Innr SP 242 smart plug to firmware version 1.9.29.

Note: Please reload ZHA or restart Home Assistant shortly after this update is fully applied to avoid an incorrectly increased "summation delivered" state.

Note: The relay may turn on or off during the upgrade process.

Changes compared to version 1.7.23 and older

  • Fixed attribute reporting failing after power-cycle
  • Improved default attribute reporting settings
  • Improved thresholds for the resettable voltage and current overload protection
  • Added possibility to disable voltage overload protection
  • kWh in 3 decimals instead of 2
  • Added Multiplier and Divisor for kWh
  • Various bug fixes and performance improvements

Disabling voltage overload protection

To disable voltage overload protection:

  1. Keep the button pressed between 15 and 20 seconds, then release
  2. After 5 seconds, the LED will start quick-blinking; keep the button pressed
  3. After 10 seconds, blinking stops; keep the button pressed
  4. After 15 seconds, the LED will start quick-blinking again
  5. Release the button. The LED will slow-blink 3 times to indicate success

Enable again in the same way.

Enabled/disabled state is persisted over power-cycles, even if not connected to a bridge. While voltage overload protection is disabled, every on/off action will double-blink the LED before assuming final state.

Current overload protection cannot be disabled.

Overload behavior

  • If the voltage or current overload protection triggers, the plug switches off and fast-blinks its LED
  • If the cause was voltage overload, the plug will go back to normal operation automatically when the overload condition disappears
  • If the cause was current overload, the plug will stay off and in overload condition until manually operated, either with the button or by power-cycling
  • Pull Request: #14

1166-0333-191D3685_ac67dc.ota

Release Notes:

This updates the Innr SP 244 smart plug to firmware version 1.9.29.

Note: Please reload ZHA or restart Home Assistant shortly after this update is fully applied to avoid an incorrectly increased "summation delivered" state.

Note: The relay may turn on or off during the upgrade process.

Changes compared to version 1.7.23 and older

  • Fixed attribute reporting failing after power-cycle
  • Improved default attribute reporting settings
  • Improved thresholds for the resettable voltage and current overload protection
  • Added possibility to disable voltage overload protection
  • kWh in 3 decimals instead of 2
  • Added Multiplier and Divisor for kWh
  • Various bug fixes and performance improvements

Disabling voltage overload protection

To disable voltage overload protection:

  1. Keep the button pressed between 15 and 20 seconds, then release
  2. After 5 seconds, the LED will start quick-blinking; keep the button pressed
  3. After 10 seconds, blinking stops; keep the button pressed
  4. After 15 seconds, the LED will start quick-blinking again
  5. Release the button. The LED will slow-blink 3 times to indicate success

Enable again in the same way.

Enabled/disabled state is persisted over power-cycles, even if not connected to a bridge. While voltage overload protection is disabled, every on/off action will double-blink the LED before assuming final state.

Current overload protection cannot be disabled.

Overload behavior

  • If the voltage or current overload protection triggers, the plug switches off and fast-blinks its LED
  • If the cause was voltage overload, the plug will go back to normal operation automatically when the overload condition disappears
  • If the cause was current overload, the plug will stay off and in overload condition until manually operated, either with the button or by power-cycling
  • Pull Request: #16

1166-0334-191E3685_0f83d8.ota

Release Notes:

This updates the Innr SP 240 v2 smart plug to firmware version 1.9.30.

Note: Please reload ZHA or restart Home Assistant shortly after this update is fully applied to avoid an incorrectly increased "summation delivered" state.

Note: The relay may turn on or off during the upgrade process.

Changes compared to version 1.7.23 and older

  • Fixed attribute reporting failing after power-cycle
  • Improved default attribute reporting settings
  • Improved thresholds for the resettable voltage and current overload protection
  • Added possibility to disable voltage overload protection
  • kWh in 3 decimals instead of 2
  • Added Multiplier and Divisor for kWh
  • Various bug fixes and performance improvements

Disabling voltage overload protection

To disable voltage overload protection:

  1. Keep the button pressed between 15 and 20 seconds, then release
  2. After 5 seconds, the LED will start quick-blinking; keep the button pressed
  3. After 10 seconds, blinking stops; keep the button pressed
  4. After 15 seconds, the LED will start quick-blinking again
  5. Release the button. The LED will slow-blink 3 times to indicate success

Enable again in the same way.

Enabled/disabled state is persisted over power-cycles, even if not connected to a bridge. While voltage overload protection is disabled, every on/off action will double-blink the LED before assuming final state.

Current overload protection cannot be disabled.

Overload behavior

  • If the voltage or current overload protection triggers, the plug switches off and fast-blinks its LED
  • If the cause was voltage overload, the plug will go back to normal operation automatically when the overload condition disappears
  • If the cause was current overload, the plug will stay off and in overload condition until manually operated, either with the button or by power-cycling
  • Pull Request: #18

1166-0335-191E3685_500102.ota

Release Notes:

This updates the Innr SP 242 v2 smart plug to firmware version 1.9.30.

Note: Please reload ZHA or restart Home Assistant shortly after this update is fully applied to avoid an incorrectly increased "summation delivered" state.

Note: The relay may turn on or off during the upgrade process.

Changes compared to version 1.7.23 and older

  • Fixed attribute reporting failing after power-cycle
  • Improved default attribute reporting settings
  • Improved thresholds for the resettable voltage and current overload protection
  • Added possibility to disable voltage overload protection
  • kWh in 3 decimals instead of 2
  • Added Multiplier and Divisor for kWh
  • Various bug fixes and performance improvements

Disabling voltage overload protection

To disable voltage overload protection:

  1. Keep the button pressed between 15 and 20 seconds, then release
  2. After 5 seconds, the LED will start quick-blinking; keep the button pressed
  3. After 10 seconds, blinking stops; keep the button pressed
  4. After 15 seconds, the LED will start quick-blinking again
  5. Release the button. The LED will slow-blink 3 times to indicate success

Enable again in the same way.

Enabled/disabled state is persisted over power-cycles, even if not connected to a bridge. While voltage overload protection is disabled, every on/off action will double-blink the LED before assuming final state.

Current overload protection cannot be disabled.

Overload behavior

  • If the voltage or current overload protection triggers, the plug switches off and fast-blinks its LED
  • If the cause was voltage overload, the plug will go back to normal operation automatically when the overload condition disappears
  • If the cause was current overload, the plug will stay off and in overload condition until manually operated, either with the button or by power-cycling
  • Pull Request: #20

1166-0336-191E3685_8008e8.ota

Release Notes:

This updates the Innr SP 244 v2 smart plug to firmware version 1.9.30.

Note: Please reload ZHA or restart Home Assistant shortly after this update is fully applied to avoid an incorrectly increased "summation delivered" state.

Note: The relay may turn on or off during the upgrade process.

Changes compared to version 1.7.23 and older

  • Fixed attribute reporting failing after power-cycle
  • Improved default attribute reporting settings
  • Improved thresholds for the resettable voltage and current overload protection
  • Added possibility to disable voltage overload protection
  • kWh in 3 decimals instead of 2
  • Added Multiplier and Divisor for kWh
  • Various bug fixes and performance improvements

Disabling voltage overload protection

To disable voltage overload protection:

  1. Keep the button pressed between 15 and 20 seconds, then release
  2. After 5 seconds, the LED will start quick-blinking; keep the button pressed
  3. After 10 seconds, blinking stops; keep the button pressed
  4. After 15 seconds, the LED will start quick-blinking again
  5. Release the button. The LED will slow-blink 3 times to indicate success

Enable again in the same way.

Enabled/disabled state is persisted over power-cycles, even if not connected to a bridge. While voltage overload protection is disabled, every on/off action will double-blink the LED before assuming final state.

Current overload protection cannot be disabled.

Overload behavior

  • If the voltage or current overload protection triggers, the plug switches off and fast-blinks its LED
  • If the cause was voltage overload, the plug will go back to normal operation automatically when the overload condition disappears
  • If the cause was current overload, the plug will stay off and in overload condition until manually operated, either with the button or by power-cycling
  • Pull Request: #22

inovelli

122F-0101-01020304_bbc7bb.ota

Release Notes:

This updates the Inovelli VZM31-SN to v3.04.

Changes

  • The temperature acquisition algorithm was optimized
  • Pull Request: #159

122F-0103-01030102_c65fd9.ota

Release Notes:

This updates the Inovelli VZM32-SN to v1.02.

Changes

  • Reduce the debounce count for button recognition
  • Fix unexpected behavior during the startup stage
  • Set the number of Zigbee scene tables to 15 (default is 3)
  • Pull Request: #187

122F-0110-01100103_7c0ac2.ota

Release Notes:

This updates the Inovelli VZM30-SN to v1.03.

Changes

  • Fixed the issue where Energy continued to increase even when the load was turned off.
  • Change the divisor attribute of the metering cluster to 1000
  • Fixed the issue where the LED effect would fail under certain circumstances.
  • Fixed the issue where "on with timed off" was ineffective.
  • Pull Request: #157

122F-0201-02020108_69b801.ota

Release Notes:

This updates the Inovelli VZM35-SN to v1.08.

Changes

  • The Power Source parameter (P21) has been changed from read-only to read-write.
  • The default value of P21 is now set to "Neutral."
  • Automatic neutral detection has been removed, and users must manually set the correct power source.
  • Users with non-neutral installations must perform this configuration step after updating to ensure proper operation.

More info: https://help.inovelli.com/en/articles/13381709-vzm35-sn-fan-switch-firmware-update-v1-08

  • Pull Request: #161

122F-0401-04010102_d82a28.ota

Release Notes:

This updates the Inovelli VZM36 to v1.02.

Changes

  • The dimming algorithm has been optimized.
  • If issues are observed in leading edge mode, please try trailing edge or full sine mode.
  • Pull Request: #163

sonoff

1286-0008-00001008_bf65da.ota

Release Notes:

This updates the Sonoff ZBMINIR2 to firmware version 1.0.8.

Changes

  • Add binding support (only available when detached relay mode is enabled)
  • Pull Request: #181

1286-000B-00002002_cb2909.ota [stale]

Release Notes:

This updates the Sonoff Plug S60ZBTPF/S60ZBTPG to firmware version 2.0.2.

Changes

  • Improves on/off state reporting during overload conditions to ensure accurate device state
  • Pull Request: #26

1286-000B-00002003_8c7677.ota [stale]

Release Notes:

This updates the Sonoff Plug S60ZBTPF/S60ZBTPG to firmware version 2.0.3.

Changes

  • Fix power, current, and voltage attributes freezing at their last value when the plug is turned off
  • Fix the instantaneous_demand attribute incorrectly being reported as supported
  • Improve energy reporting reliability with safeguards for today, yesterday, monthly, and total energy accumulation
  • Improve robustness of energy statistic updates in edge-case scenarios
  • Pull Request: #165

1286-000B-00002005_efd644.ota

Release Notes:

This updates the Sonoff Plug S60ZBTPF/S60ZBTPG to firmware version 2.0.5.

Changes

  • Add support for energy reporting accuracy down to 0.001 kWh
  • Pull Request: #199

1286-0044-00001007_3524ca.ota

Release Notes:

This updates the Sonoff MINI-ZB2GS to firmware version 1.0.7.

Changes

  • Add step function
  • Change the external switch pairing trigger: toggle the external switch 10 times after 2 minutes of Zigbee disconnection
  • Pull Request: #179

1286-0045-00001005_ea654a.ota

Release Notes:

This updates the Sonoff MINI-ZBDIM to firmware version 1.0.5.

Bugfixes

  • Calibration method set fail

New features

  • NTC threshold value update to 115°C
  • Firmware supports manual calibration mode to allow direct configuration of minimum and maximum level
  • Light dimming is supported when the key type is single touch key
  • Pull Request: #28

1286-0046-00001102_a07705.ota

Release Notes:

This updates the Sonoff MINI-ZB1GSP to firmware version 1.1.2.

Bug fixes

  • Fix synchronization issues between BLE and Zigbee
  • Fix storage and calculation issues with electricity consumption and price

New features

  • Add inching switch and scene threshold report
  • Add voltage frequency attribute
  • Pull Request: #169

1286-0047-00001102_33f69d.ota

Release Notes:

This updates the Sonoff MINI-ZB1GP to firmware version 1.1.2.

Bug fixes

  • Fix synchronization issues between BLE and Zigbee
  • Fix storage and calculation issues with electricity consumption and price

New features

  • Add scene threshold report
  • Add voltage frequency attribute
  • Pull Request: #173

1286-0049-00001005_a9ce60.ota

Release Notes:

This updates the Sonoff BASIC-ZB1GSP to firmware version 1.0.5.

  • Pull Request: #193

1286-080E-00001100_a91db8.ota

Release Notes:

This updates the Sonoff SNZB-01M Smart Scene Button to firmware version 1.1.0.

Changes

  • Improved binding functionality: each button now supports both on/off control and brightness adjustment
    • This is enabled by adding the OnOff cluster to endpoints 2, 3, and 4 (previously only available on endpoint 1)
  • Performance improvements
  • Pull Request: #51

1286-2007-00001404_fbc68d.ota

Release Notes:

This updates the Sonoff TRVZB to firmware version 1.4.44.

Changes
This release adds Adaptive Mode. It is a feature designed to minimize temperature fluctuations. When enabled, the device dynamically adjusts the valve opening based on the temperature changes and the target temperature to maintain a more stable environment.

Note: Enabling Adaptive Mode will automatically disable Valve Opening Percentage and Temperature Accuracy.

  • Pull Request: #24

1286-200C-00001100_dfdd63.ota [disabled] [stale]

Release Notes:

This updates the Sonoff SNZB-SWV1C smart water valve (Hydro ONE and Hydro ONE Lite: SWV-ZFE, SWV-ZFU, SWV-ZNE, SWV-ZNU) to firmware version 1.1.0.

Changes

  • Add support for setting the water flow unit (liter, US gallon, or imperial gallon) on valves with a flow meter
  • Pull Request: #223

1286-210C-00001009_8e62f7.ota [disabled] [stale]

Release Notes:

This updates the Sonoff SNZB-SWV2C dual-channel smart water valve (Hydro DUO: SWV-ZF2, SWV-ZF2E, SWV-ZF2U) to firmware version 1.0.9.

Changes

  • Add support for setting the water flow unit (liter, US gallon, or imperial gallon)
  • Pull Request: #234

third_reality

1233-D3A1-0000004F_ef1152.ota

Release Notes:

This updates the ThirdReality Wireless Motion Sensor (3RMS16BZ) to v1.00.79.

  • Pull Request: #109

1233-D3A2-0000003F_62b6f8.ota [stale]

Release Notes:

This updates the ThirdReality Door Sensor (3RDS17BZ) to v1.00.63.

  • Pull Request: #103

1233-D3A2-00000045_ef8371.ota

Release Notes:

This updates the ThirdReality Door Sensor (3RDS17BZ) to v1.00.69.

Changes

  • Add VID and PID information to the device log
  • Improve health monitoring logging
  • Remove the OnOff cluster
  • Pull Request: #227

1233-D3A3-00000049_a99370.ota

Release Notes:

This updates the ThirdReality Water Leak Sensor (3RWS18BZ) to v1.00.73.

  • Pull Request: #135

1233-D3A5-00000024_0af2a8.ota

Release Notes:

This updates the ThirdReality Smart Switch Gen3 (3RSS009Z) to v1.00.36.

  • Pull Request: #125

1233-D3A6-10013065_2c5692.ota

Release Notes:

This updates the ThirdReality Smart Plug Gen1, Smart Plug Gen2, or Smart Plug E2 (3RSP019BZ, 3RSP02028BZ, or 3RSPE01044BZ) to v1.01.01.

  • Pull Request: #147

1233-D3A7-00000054_80f4c5.ota

Release Notes:

This updates the ThirdReality Smart Blind (3RSB015BZ) to v1.00.84.

  • Pull Request: #121

1233-D3A8-0000002F_85880f.ota

Release Notes:

This updates the ThirdReality Smart Button (3RSB22BZ) to v1.00.47.

  • Pull Request: #155

1233-D3A9-00000028_f52fa7.ota

Release Notes:

This updates the ThirdReality Temperature and Humidity Sensor (3RTHS24BZ) to v1.00.40.

  • Pull Request: #131

1233-D3AA-00000037_4a3064.ota

Release Notes:

This updates the ThirdReality Smart Blind Gen2 (3RSB02015Z) to v1.00.55.

  • Pull Request: #123

1233-D3AB-00000037_8d2375.ota

Release Notes:

This updates the ThirdReality Smart Vibration Sensor (3RVS01031Z) to v1.00.55.

  • Pull Request: #133

1233-D3D0-00000009_e469a4.ota

Release Notes:

This updates the ThirdReality Smart Button ZB2 (3RSB01085Z) to v1.00.09.

  • Pull Request: #111

130D-0000-00000056_b2f39f.ota

Release Notes:

This updates the ThirdReality Multi-Function Night Light (3RSNL02043Z) to v1.00.86.

  • Pull Request: #107

1407-D3AC-0000004A_20781c.ota

Release Notes:

This updates the ThirdReality Smart Color Bulb ZL1 (3RCB01057Z) to v1.00.74.

  • Pull Request: #139

1407-D3AE-00000016_2d7f28.ota [stale]

Release Notes:

This updates the ThirdReality Smart Filter Sensor to v1.00.22.

  • Pull Request: #99

1407-D3AE-00000018_0f2790.ota [stale]

Release Notes:

This updates the ThirdReality Smart Filter Sensor (3RAP0149BZ) to v1.00.24.

  • Pull Request: #201

1407-D3AE-00000019_db5fd2.ota [stale]

Release Notes:

This updates the ThirdReality Smart Filter Sensor (3RAP0149BZ) to v1.00.25.

  • Pull Request: #205

1407-D3AE-0000001A_9bcffe.ota

Release Notes:

This updates the ThirdReality Smart Filter Sensor (3RAP0149BZ) to v1.00.26.

  • Pull Request: #215

1407-D3AF-00000033_b7c5d2.ota

Release Notes:

This updates the ThirdReality Smart Soil Moisture Sensor (3RSM0147Z) to v1.00.51.

  • Pull Request: #127

1407-D3B0-0000002D_de90d1.ota

Release Notes:

This updates the ThirdReality Smart Watering Kit (3RWK0148Z) to v1.00.45.

  • Pull Request: #119

1407-D3B1-00000024_a6a64a.ota

Release Notes:

This updates the ThirdReality Garage Door Tilt Sensor (3RDTS01056Z) to v1.00.36.

  • Pull Request: #105

1407-D3B2-0000000E_992fb6.ota [stale]

Release Notes:

This updates the ThirdReality Smart Motion Sensor R1 (3RSMR01067Z) to v1.00.14.

  • Pull Request: #113

1407-D3B2-00000010_ede2c4.ota

Release Notes:

This updates the ThirdReality Smart Motion Sensor R1 (3RSMR01067Z) to v1.00.16.

  • Pull Request: #185

1407-D3B4-0000002F_429dec.ota

Release Notes:

This updates the ThirdReality Smart Plug UZ1 (3RSPU01080Z) to v1.00.47.

  • Pull Request: #145

1407-D3B4-0000002F_749194.ota

Release Notes:

This updates the ThirdReality Smart Plug Gen3 (3RSP02064Z, hardware revision 0xD3B4) to v1.00.47.

  • Pull Request: #151

1407-D3B5-0000002A_7f1585.ota [stale]

Release Notes:

This updates the ThirdReality Smart Dual Plug ZP1 (3RDP01072Z) to v1.00.42.

  • Pull Request: #141

1407-D3B5-00000034_1d2971.ota

Release Notes:

This updates the ThirdReality Smart Dual Plug ZP1 (3RDP01072Z) to v1.00.52.

  • Pull Request: #190

1407-D3B6-00000034_6cac97.ota

Release Notes:

This updates the ThirdReality Smart Wall Outlet ZW1 (3RWP01073Z) to v1.00.52.

  • Pull Request: #191

1407-D3B9-00000014_44fad6.ota

Release Notes:

This updates the ThirdReality Smart Presence Sensor R2 (3RPS01083Z) to v1.00.20.

  • Pull Request: #115

1407-D3BD-0000002F_d6d185.ota [stale]

Release Notes:

This updates the ThirdReality Smart Plug Gen3 (3RSP02064Z, hardware revision 0xD3BD) to v1.00.47.

  • Pull Request: #149

1407-D3BD-00000038_c88d72.ota

Release Notes:

This updates the ThirdReality Smart Plug Gen3 (3RSP02064Z, hardware revision 0xD3BD) to v1.00.56.

Changes

  • Restore the configured LED brightness after a power cycle
  • Pull Request: #229

1407-D3BE-0000002F_0f77f7.ota

Release Notes:

This updates the ThirdReality Smart Plug E3 (3RSPE02065Z) to v1.00.47.

  • Pull Request: #143

1407-D3BF-00000015_265b3e.ota

Release Notes:

This updates the ThirdReality Smart Soil Moisture Sensor Gen2 (3RSM0347Z) to v1.00.21.

  • Pull Request: #117

1407-D3C1-0000000F_dd668d.ota

Release Notes:

This updates the ThirdReality T&H Sensor Lite Gen2 (3RTHS0324Z) to v1.00.15.

  • Pull Request: #129

1407-D3C2-00000011_8af5e2.ota [stale]

Release Notes:

This updates the ThirdReality Smart Water Leak Sensor WL2 (3RWS0218Z) to v1.00.17.

  • Pull Request: #137

1407-D3C2-00000012_35e255.ota

Release Notes:

This updates the ThirdReality Smart Water Leak Sensor WL2 (3RWS0218Z) to v1.00.18.

Changes

  • Improve the fast heartbeat behavior in the 30 seconds after the hub reconnects following an OTA update
  • Pull Request: #233

1407-D3C3-00000023_1feeff.ota [stale]

Release Notes:

This updates the ThirdReality Multi-Function Smart Presence Sensor R3 (3RPL01084Z) to v1.00.35.

  • Pull Request: #101

1407-D3C3-00000028_27e2e4.ota

Release Notes:

This updates the ThirdReality Multi-Function Smart Presence Sensor R3 (3RPL01084Z) to v1.00.40.

  • Pull Request: #153

1407-D401-00000002_f1e047.ota [stale]

Release Notes:

This updates the ThirdReality Smart Motion Sensor Gen2 (3RMS26Z) to v1.00.02.

  • Pull Request: #203

1407-D401-00000004_636c30.ota [stale]

Release Notes:

This updates the ThirdReality Smart Motion Sensor Gen2 (3RMS26Z) to v1.00.04.

  • Pull Request: #213

1407-D401-00000006_4db260.ota

Release Notes:

This updates the ThirdReality Smart Motion Sensor Gen2 (3RMS26Z) to v1.00.06.

  • Pull Request: #221

1407-D403-00000004_e1e881.ota

Release Notes:

This updates the ThirdReality Smart Outdoor Range Extender (3ROR0194Z) to v1.00.04.

  • Pull Request: #211

1407-D405-0000000E_4ee304.ota [stale]

Release Notes:

This updates the ThirdReality Air Quality Sensor (3RAQ1096Z) to v1.00.14.

  • Pull Request: #167

1407-D405-0000000F_cba4ad.ota [stale]

Release Notes:

This updates the ThirdReality Air Quality Sensor (3RAQ1096Z) to v1.00.15.

  • Pull Request: #175

1407-D405-00000010_d6d529.ota [stale]

Release Notes:

This updates the ThirdReality Air Quality Sensor (3RAQ1096Z) to v1.00.16.

  • Pull Request: #183

1407-D405-00000011_0adecc.ota

Release Notes:

This updates the ThirdReality Air Quality Sensor (3RAQ1096Z) to v1.00.17.

  • Pull Request: #195

1407-D407-00000002_ee91ad.ota

Release Notes:

This updates the ThirdReality Smart Alarm Siren (3RAS1098Z) to v1.00.02.

  • Pull Request: #208

1407-D408-00000002_6efd7e.ota

Release Notes:

This updates the ThirdReality Smart Alarm Keypad (3RAK1099Z) to v1.00.02.

  • Pull Request: #209

ubisys

10F2-7B2D-01810460_328d1a.ota

Release Notes:

This updates the ubisys Heating Regulator H1 to v1.8.1 (Stack 4.6.0).

Changes

  • An attribute report is now generated when the occupied heating setpoint is adjusted using the rotary dial
  • Pull Request: #43

10F2-7B31-02600460_099597.ota

Release Notes:

This updates the ubisys Dimmer D1 to v2.6.0 (Stack 4.6.0).

Changes

  • Bug fixes and improvements
  • Pull Request: #31

10F2-7B33-02600460_53ed4b.ota

Release Notes:

This updates the ubisys Switching Actuator S2 to v2.6.0 (Stack 4.6.0).

Changes

  • Bug fixes and improvements
  • Pull Request: #39

10F2-7B34-02600462_4293bb.ota

Release Notes:

This updates the ubisys Shutter Actuator J1 to v2.6.0 (Stack 4.6.2).

Changes

  • Bug fixes and improvements
  • Pull Request: #37

10F2-7B38-02600460_ea7e69.ota

Release Notes:

This updates the ubisys Dimmer D1-R to v2.6.0 (Stack 4.6.0).

Changes

  • Bug fixes and improvements
  • Pull Request: #41

10F2-7B45-02610463_459e97.ota

Release Notes:

This updates the ubisys Switching Actuator S1-R (Series 2) to v2.6.1 (Stack 4.6.3).

Changes

  • Fix numeric overflow in metrology engine to support metering loads that exceed 3276.7W
  • Other bug fixes and improvements
  • Pull Request: #33

10F2-7B49-02610464_2faab5.ota

Release Notes:

This updates the ubisys Control Unit C4 (Series 2) to v2.6.1 (Stack 4.6.4).

Changes

  • OTA client cluster included in the simple descriptor of the management application endpoint #232
  • Support for Touch Link commissioning removed
  • Other bug fixes and improvements
  • Pull Request: #35

10F2-7B4A-02600460_67f6ba.ota

Release Notes:

This updates the ubisys Router R0 (Series 2) to v2.6.0 (Stack 4.6.0).

Changes

  • Add all supported server clusters to the simple descriptor of the management application endpoint 232
  • Remove support for Touch Link commissioning
  • Other bug fixes and improvements
  • Pull Request: #197

zunzunbee

15BB-0064-00103005_e30b52.ota

Release Notes:

This updates the zunzunbee SSWZ8T slate switch to firmware version 01.03.005.

Changes

  • Improved touch sensitivity
  • Reduced long press duration
  • Pull Request: #56