""/var/run/openhalo/.s.PGSQL.5432.lock"": No such file or directory"

[shawn0915]

配置文件里默认是 unix_socket_directories = '/var/run/openhalo' 但编译安装时并不会自动创建该目录，导致启动失败

[shawnyan@rl9 diag]$ cat haloserver-2025-04-02_185147.csv
2025-04-02 18:51:47.831 CST,,,69662,,67ed16c3.1101e,1,,2025-04-02 18:51:47 CST,,0,LOG,00000,"ending log output to stderr",,"Future log output will go to log destination ""csvlog"".",,,,,,,"","postmaster",,0
2025-04-02 18:51:47.831 CST,,,69662,,67ed16c3.1101e,2,,2025-04-02 18:51:47 CST,,0,LOG,00000,"starting openHalo 1.0.14.10-ShawnYan on x86_64-pc-linux-gnu, compiled by gcc (GCC) 11.5.0 20240719 (Red Hat 11.5.0-2), 64-bit",,,,,,,,,"","postmaster",,0
2025-04-02 18:51:47.831 CST,,,69662,,67ed16c3.1101e,3,,2025-04-02 18:51:47 CST,,0,LOG,00000,"listening on IPv4 address ""0.0.0.0"", port 5432",,,,,,,,,"","postmaster",,0
2025-04-02 18:51:47.831 CST,,,69662,,67ed16c3.1101e,4,,2025-04-02 18:51:47 CST,,0,LOG,00000,"listening on IPv6 address ""::"", port 5432",,,,,,,,,"","postmaster",,0
2025-04-02 18:51:47.832 CST,,,69662,,67ed16c3.1101e,5,,2025-04-02 18:51:47 CST,,0,FATAL,58P01,"could not create lock file ""/var/run/openhalo/.s.PGSQL.5432.lock"": No such file or directory",,,,,,,,,"","postmaster",,0
2025-04-02 18:51:47.833 CST,,,69662,,67ed16c3.1101e,6,,2025-04-02 18:51:47 CST,,0,LOG,00000,"database system is shut down",,,,,,,,,"","postmaster",,0

建议改成 /tmp

[ThinkJ001]

/tmp下的文件会被系统自动清理，因此不建议放在/tmp下

[ThinkJ001]

倒是可以考虑加个初始化脚本，不过需要以root权限执行了

[ThinkJ001]

临时的解决方案：在README里增加了创建/var/run/openhalo的步骤

[shawn0915]

或者放到 data 路径下也是可以的

[shawn0915]

倒是可以考虑加个初始化脚本，不过需要以root权限执行了

打 rpm 的时候可以写到 spec 里

[ThinkJ001]

倒是可以考虑加个初始化脚本，不过需要以root权限执行了

打 rpm 的时候可以写到 spec 里

这是个好建议