ArxivArduino.txt

If there are any errors
please Abort, and run `arxiv_required` for required package installation, and start again
Please wait while we phrase the requested information from global arxiv[arxiv.org] servers 
------------>
---------------------------->
------------------------------------------------------>
 
Design and construction of a desktop AC susceptometer using an Arduino and a Bluetooth for serial interface (Israel Perez - 5 April, 2018)
The Arduino/bluetooth serial interface allows the user to have a connection to almost any computer and thus avoids the problem of connectivity between the computer and the peripherals such as the lock-in amplifier and the function generator. To test our instrument we performed measurements on magnetic materials and show that the system is reliable at both room temperature and cryogenic temperatures (77 K)
Link: https://arxiv.org/abs/1804.03232
====================================================
A cost effective and reliable environment monitoring system for HPC applications (Peter Bernd Otte - 29 January, 2018)
This device incorporates a Raspberry Pi, an Arduino and PoE (Power over Ethernet) functionality in a compact form factor. The system is in use at the 2 PFLOPS cluster of the Johannes Gutenberg-University and Helmholtz-Institute in Mainz.
Link: https://arxiv.org/abs/1802.00724
====================================================
Application-Layer Clock Synchronization for Wearables Using Skin Electric Potentials Induced by Powerline Radiation (Zhenyu Yan - 24 September, 2017)
Extensive evaluation based on our Arduino and TinyOS implementations shows that TouchSync's synchronization errors are below 3 and 7 milliseconds on the same wearer and between two wearers 10 kilometers apart, respectively.
Link: https://arxiv.org/abs/1709.08296
====================================================
Time-Resolved and Temperature Tuneable Measurements of Fluorescent Intensity using a Smartphone Fluorimeter (Md Arafat Hossain - 28 February, 2017)
All components are controlled using a smartphone battery powered Arduino microcontroller and a customised Android application that allows sequential fluorescence imaging and quantification every DELTA t = 4 seconds. The normalised fluorescence intensity over time of the latter chemosensor dye complex in the presence of Zn ion is observed to accelerate with an increasing rate constant, k = 1.94 min-1 at T = 15 C and k = 3.64 min-1 at T = 30 C, approaching a factor of ~ 2 with only a change in temperature of DELTA T = 15 C
Link: https://arxiv.org/abs/1703.00350
====================================================
Arduino control of a pulsatile flow rig (Sita Drost - 20 July, 2017)
This note describes the design and testing of a programmable pulsatile flow pump using an Arduino micro-controller. The system described here was designed to be used in an in-vitro set-up for vascular access hemodynamics research, and hence incorporates a gear pump that can deliver up to 1.5 l/min in a test flow loop. The resulting system was shown to be able to produce the targeted patient-specific waveform with less than 3.6% error
Link: https://arxiv.org/abs/1612.03306
====================================================
Localization for Wireless Sensor Networks: A Neural Network Approach (Shiu Kumar - 7 February, 2016)
In order to evaluate the performance of the proposed method in real time, the model obtained was then implemented on the Arduino microcontroller. With four anchor nodes, an average 2D localization error of 0.2953 m has been achieved with a 12-12-2 neural network structure
Link: https://arxiv.org/abs/1610.04494
====================================================
RFID-Cloud Smart Cart System (Yerlan Berdaliyev - 12 August, 2016)
It involves an embedded electronic hardware that consists of an OLED display, Arduino Mega 2560 board, a specifically designed PCB, a Wi-Fi module, 13.56 MHz HF RFID reader, a power supply and a shopping cart.
Link: https://arxiv.org/abs/1608.03724
====================================================
Measuring g with an Arduino micro-controller in a simple free fall experiment (Alexandre C. Tort - 24 November, 2015)
A simple way of measuring g in the basic lab with a an Arduino micro-controller is discussed. Our relative error is 0.1 %.
Link: https://arxiv.org/abs/1511.08231
====================================================
Speech Controlled Quadruped (Devashish Kulkarni - 24 June, 2015)
The main processing unit of the robot will be Arduino Uno. We are using 8 servos for the movement of its legs while two servos will be required for each leg. The interface between a human and the robot is generated through Python programming and Eclipse software and it is implemented by using Bluetooth module HC 06.
Link: https://arxiv.org/abs/1506.07413
====================================================
YoMo - The Arduino based Smart Metering Board (Christoph Klemenjak - 11 September, 2014)
The smart meter platform, provided as open hardware, is designed with a connector interface compatible to the Arduino platform, thus opening the possibilities for smart meters with flexible hardware and computation features, starting from low-cost 8 bit micro controllers up to powerful single board computers that can run Linux
Link: https://arxiv.org/abs/1409.3404
====================================================
VR-Stepper: A Do-It-Yourself Game Interface For Locomotion In Virtual Environments (Denys J. C. Matthies - 15 July, 2014)
In this paper, we describe a simple and inexpensive way to build a useful locomotion interface using a conventional sports stepper and an Arduino. We conducted a user study with 10 participants to evaluate the impression on the joy and ease of use, immersion and reliability in comparison to other interfaces used for locomotion, such as the Wii Balance Board and a Wand Joystick
Link: https://arxiv.org/abs/1407.3948
====================================================
Context-aware Dynamic Discovery and Configuration of 'Things' in Smart Environments (Charith Perera - 8 November, 2013)
The significance of the proposed solution is validated using a test-bed that comprises 52 Arduino-based Libelium sensors.
Link: https://arxiv.org/abs/1311.2134
====================================================
Deployment and Evaluation of a 802.15.4 Heterogeneous Network (Orestis Akribopoulos - 2 February, 2011)
In this work we study the performance of a heterogeneous wireless sensor network which consists of 4 different hardware platforms (TelosB, SunSPOT, Arduino, iSense)
Link: https://arxiv.org/abs/1102.0058
====================================================
Implementing Genetic Algorithms on Arduino Micro-Controllers (Nuno Alves - 9 February, 2010)
This short paper tackles that situation by demonstrating how genetic algorithms can be implemented in Arduino Duemilanove, a 16 MHz open-source micro-controller, with limited computation power and storage resources
Link: https://arxiv.org/abs/1002.2012
====================================================
Temperature-dependent transport measurements with Arduino (A. Hilberer - 16 September, 2018)
In this article, we show how temperature-dependent transport measurements can be performed using an Arduino microcontroller, from cryogenic temperatures up to room temperature or above
Link: https://arxiv.org/abs/1809.08075
====================================================
Rock bottom, the world, the sky: Catrobat, an extremely large-scale and long-term visual coding project relying purely on smartphones (Kirshan Kumar Luhana - 19 August, 2018)
We also have created a plethora of extensions, e.g., for various educational robots, including Lego Mindstorms and flying Parrot quadcopters ("the sky"), as well as for controlling arbitrary external devices through Arduino or Raspberry Pi boards, going up to the stratosphere and even beyond to interplanetary space ("the sky")
Link: https://arxiv.org/abs/1808.06292
====================================================
Notes on pulse-width modulation appropriate for a sophomore-level electronics or programming class (Nathan T Moore - 29 July, 2018)
Pulse-width modulation is a nice way to create pseudo analog outputs from a microcontroller (eg, an Arduino), which is limited to digital output signals
Link: https://arxiv.org/abs/1807.04246
====================================================
Automatic streetlights that glow on detecting night and object using Arduino (Zain Mumtaz - 28 June, 2018)
The proposed work is accomplished by using Arduino microcontroller and sensors that will control the electricity based on night and object's detection
Link: https://arxiv.org/abs/1806.10968
====================================================
An apparatus for measuring a material's photomechanical response (Elizabeth Bernhardt - 25 June, 2018)
The key components are a laser pointer to actuate the material, a force sensor from an inexpensive jeweler's balance to measure the response, an Arduino for data acquisition and a means for mechanically mounting the components
Link: https://arxiv.org/abs/1806.09699
====================================================
Studying real-world societal problems in a STEM context through robotics (Chronis Kynigos - 29 May, 2018)
The workshops were designed and implemented in the context of the European project Educational Robotics for STEM (ER4STEM) with students from different age groups using Lego Mindstorms and Arduino kits.
Link: https://arxiv.org/abs/1806.03245
====================================================
Design and Implementation of a Low-Cost Secure Vehicle Tracking System (Ibraheem Kasim Ibraheem Salam Wisam Hadi - 1 May, 2018)
The following module consists of microcontroller (Arduino) platform, XBee, and GPS for navigation purpose. The GPS delivers real-time data about the location of the vehicle and directs the coordinate to the XBee via the Arduino platform
Link: https://arxiv.org/abs/1805.00510
====================================================
SideRand: A Heuristic and Prototype of a Side-Channel-Based Cryptographically Secure Random Seeder Designed to Be Platform- and Architecture-Agnostic (JV Roig - 9 April, 2018)
This paper proposes a software solution based on side-channel measurements as a source of high-quality entropy (nicknamed "SideRand"), that can theoretically be applied to most platforms (large servers, appliances, even maker boards like RaspberryPi or Arduino), and generates a seed for a regular CSPRNG to enable proper cryptographic operations for security and privacy
Link: https://arxiv.org/abs/1804.02904
====================================================
A novel real time geolocation tracking tool (Mehmet Serdar Güzel - 22 March, 2018)
This study proposes a tool in which an electronic circuit that is consisted of integration of SIM908 shield and Arduino card is used as a GPS receiver
Link: https://arxiv.org/abs/1803.08325
====================================================
How to automate a kinematic mount using a 3D printed Arduino-based system (Luis José Salazar-Serrano - 16 March, 2018)
It combines 3D printed components, an Arduino board, stepper motors, and simple electronics
Link: https://arxiv.org/abs/1803.06429
====================================================
Intelligent Irrigation System Based on Arduino (Carlos Gilarranz Casado - 28 February, 2018)
This paper explains how to build an intelligent irrigation system using Arduino (a micro- controller) and many devices (humidity, temperature, pressure and water flow sensors)
Link: https://arxiv.org/abs/1803.00097
====================================================
The CosmicWatch Desktop Muon Detector: a self-contained, pocket sized particle detector (Spencer N. Axani - 10 March, 2018)
Arduino- and Python-based software is provided to operate the detector and an online application to plot the data in real-time
Link: https://arxiv.org/abs/1801.03029
====================================================
Raspberry Pi and Arduino Uno Working together as a Basic Meteorological Station (José Rafael Cortés León - 21 November, 2017)
The present paper describes a novel Raspberry Pi and Arduino UNO architecture used as a meteorological station. The principle followed is to configure Raspberry as a collector for measures obtained from Arduino, transmitting occurs via USB; meanwhile, Raspberry broadcasts them via a web page
Link: https://arxiv.org/abs/1711.09750
====================================================
Learning Motion Predictors for Smart Wheelchair using Autoregressive Sparse Gaussian Process (Zicong Fan - 7 June, 2018)
This system uses an RGB-D camera and an Arduino interface board to capture motion data, including visual odometry and joystick signals, via ROS communication
Link: https://arxiv.org/abs/1710.11319
====================================================
Development of a passive Rehabilitation Robot for the wrist joint through the implementation of an Arduino UNO microcontroller (E Ceballos - 7 June, 2017)
In this research was implemented the use of an Arduino UNO R3 microcontroller to control the movements of a prototype robotic functional developed to perform rehabilitation exercises in the wrist joint; This device can be used to assist the physiatrist to rehabilitate the tendinitis, synovitis, rheumatoid arthritis and for pre-operative and post-operative therapy in this joint
Link: https://arxiv.org/abs/1706.05076
====================================================
Teaching Functional Patterns through Robotic Applications (J. Boender - 28 November, 2016)
To support these, we developed the Middlesex Robotic plaTfOrm (MIRTO), an open-source platform built using Raspberry Pi, Arduino, HUB-ee wheels and running Racket (a LISP dialect)
Link: https://arxiv.org/abs/1611.09470
====================================================
An IoT application development using IoTSuite (Saurabh Chauhan - 6 September, 2016)
These applications have been tested on several IoT technologies such as Android, Raspberry PI, Arduino, and JavaSE-enabled devices, Messaging protocols such as MQTT, CoAP, WebSocket, Server technologies such as Node.js, Relational database such as MySQL, and Microsoft Azure Cloud services.
Link: https://arxiv.org/abs/1609.01676
====================================================
Pointing System for the Balloon-Borne Astronomical Payloads (K. Nirmal - 16 December, 2016)
The system is developed using off-the-shelf components such as Arduino Uno controller, HMC 5883L magnetometer, MPU-9150 Inertial Measurement Unit (IMU) and iWave GPS receiver unit
Link: https://arxiv.org/abs/1609.00184
====================================================
Autonomous Dome for Robotic Telescope (Akash Kumar - 29 April, 2016)
We have developed electronics using Arduino electronic circuit boards with home grown logic and software to control the dome operations. We are in the process of completing the drivers to link our Arduino based dome controller with RTS2
Link: https://arxiv.org/abs/1604.08370
====================================================
A Low Cost Eeg Based Bci Prosthetic Using Motor Imagery (Daniel Elstob - 9 March, 2016)
an open source Arduino board) is able to control the hand through character input associated with the taught actions of the suite. Finally depending on the classification of the brain signal a Python script outputs the driving command to the Arduino to control the prosthetic
Link: https://arxiv.org/abs/1603.02869
====================================================
Crowdsourcing On-street Parking Space Detection (Ruizhi Liao - 1 March, 2016)
The prototype includes an ultrasonic sensor, a GPS receiver and associated Arduino micro-controllers
Link: https://arxiv.org/abs/1603.00441
====================================================
Project-based physics labs using low-cost open-source hardware (F. Bouquet - 16 August, 2016)
Theses labs are based on new open-source low-cost equipment (Arduino microcontrollers and compatible sensors)
Link: https://arxiv.org/abs/1601.06659
====================================================
Interactive Museum Exhibits with Microcontrollers: A Use-Case Scenario (Lok Wong - 25 September, 2015)
Specifically, the Arduino and Raspberry Pi provide the necessary linkages between the Internet and hardware, allowing for a greater interactive experience for museum visitors
Link: https://arxiv.org/abs/1509.07626
====================================================
Development of a Low-Cost Experimental Quadcopter Testbed Using an Arduino Controller and Software (Ankyda Ji - 20 August, 2015)
The unstable, non-linear quadcopter dynamics are stabilized using a generic control algorithm through the novel Arduino based software architecture. Experimental results demonstrate the validation of the integration and the novel software package running on an Arduino board to control autonomous quadcopter flights.
Link: https://arxiv.org/abs/1508.04886
====================================================
A low cost network of spectrometer radiation detectors based on the ArduSiPM a compact transportable Software/Hardware Data Acquisition system with Arduino DUE (Valerio Bocci - 5 June, 2015)
The ArduSiPM is an easily battery operable handled device using an Arduino DUE (an open Software/Hardware board) as processor board and a piggy-back custom designed board (ArduSiPM Shield), the Shield contains all the blocks features to monitor, set and acquire the SiPM using internet network.
Link: https://arxiv.org/abs/1506.01915
====================================================
Phase-Sensitive Detection in the undergraduate lab using a low-cost microcontroller (K. D. Schultz - 24 January, 2015)
Low-cost microcontrollers such as the Arduino family of devices seem like a good match for learning about PSD; however, making a self-contained device (reference signal, voltage input, mixing, filtering, and display) is difficult, but in the end the project teaches students "tricks" to turn the Arduino into a true scientific instrument.
Link: https://arxiv.org/abs/1501.06074
====================================================
The ArduSiPM a compact trasportable Software/Hardware Data Acquisition system for SiPM detector (Valerio Bocci - 28 November, 2014)
The ArduSiPM uses an Arduino DUE (an open Software/Hardware board based on an ARM Cortex-M3 microcontroller) as processor board and a piggyback custom designed board (Shield), these are controlled by custom developed software and interface
Link: https://arxiv.org/abs/1411.7814
====================================================
A model for including Arduino microcontroller programming in the introductory physics lab (Andrew J. Haugen - 28 July, 2014)
Results from the implementation of this idea, in two University Physics sections, using Arduino microcontrollers, are also described.
Link: https://arxiv.org/abs/1407.7613
====================================================
Designing a minimalist socially aware robotic agent for the home (Matthew R. Francisco - 26 June, 2014)
We use the Katie Family of robots, built on the iRobot Create platform, an Arduino Uno, and a Raspberry Pi
Link: https://arxiv.org/abs/1406.6873
====================================================
Traffic Monitoring Using M2M Communication (Shiu Kumar - 31 March, 2014)
The real-time traffic data is processed by the Personal Computer (PC) at the sub roadway station and the traffic flow rate data is transmitted to the main roadway station Arduino 3G via email, where the data is extracted and traffic flow rate displayed.
Link: https://arxiv.org/abs/1404.0106
====================================================
Ubiquitous Smart Home System Using Android Application (Shiu Kumar - 10 February, 2014)
The Arduino Ethernet is used to eliminate the use of a personal computer (PC) keeping the cost of the overall system to a minimum while voice activation is incorporated for switching functionalities
Link: https://arxiv.org/abs/1402.2114
====================================================
A low-cost mirror mount control system for optics setups (Maithreyi Gopalakrishnan - 17 December, 2013)
Geared motors for hobby robotics are controlled by an Arduino microcontroller board in combination with an H bridge to finely position the mirror mount actuators
Link: https://arxiv.org/abs/1312.6557
====================================================
Implementation of WSN which can simultaneously monitor Temperature conditions and control robot for positional accuracy (Sharul Agrawal - 16 December, 2013)
The two temperature sensor nodes used here consists of a Arduino microcontroller and XBee wireless communication module based on IEEE 802.15.4 standard while the robot has inherent FPGA board as a processing unit with xbee module connected via Rs-2332 cable for serial communication between zigbee device and FPGA
Link: https://arxiv.org/abs/1312.4634
====================================================
Plasduino: an inexpensive, general purpose data acquisition framework for educational experiments (L. Baldini - 26 August, 2014)
Based on the Arduino development platform, Plasduino is an open-source data acquisition framework specifically designed for educational physics experiments
Link: https://arxiv.org/abs/1312.1805
====================================================
The Arduino as a Hardware Random-Number Generator (Benedikt Kristinsson - 16 December, 2012)
The Arduino Reference Manual recommends using it to seed a pseudo random number generator (PRNG) due to its ability to read random atmospheric noise from its analog pins. Unfortunately, we show by statistical methods that the atmospheric noise of an Arduino is largely predictable in a variety of settings, and is thus a weak source of entropy
Link: https://arxiv.org/abs/1212.3777
====================================================
Personal Safety Triggering System on Android Mobile Platform (Ashokkumar Ramalingam - 10 August, 2012)
One in which, application uses a GPS to track the location information of the user and send those location information as a message via SMS, email and post it on Facebook wall Simultaneously, an emergency signal is sent to Arduino Microcontroller.This application is written in JAVA programming language which runs on Eclipse Integrated Development Kit.
Link: https://arxiv.org/abs/1208.3138
====================================================
Catroid: A Mobile Visual Programming System for Children (Wolfgang Slany - 28 April, 2012)
Catroid also allows to wirelessly control external hardware such as Lego Mindstorms robots via Bluetooth, Bluetooth Arduino boards, as well as Parrot's popular and inexpensive AR.Drone quadcopters via WiFi.
Link: https://arxiv.org/abs/1204.6411
====================================================