Dockerfile.RELEASE.rockylinux9

# --------------------------------------------------------------------
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed
# with this work for additional information regarding copyright
# ownership. The ASF licenses this file to You under the Apache
# License, Version 2.0 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy of the
# License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied. See the License for the specific language governing
# permissions and limitations under the License.
#
# --------------------------------------------------------------------
# Multi-stage Dockerfile for Apache Cloudberry Sandbox Environment (Release)
# --------------------------------------------------------------------
# This Dockerfile compiles and installs a specific release version of
# Cloudberry, then creates a runtime environment for testing and development.
# --------------------------------------------------------------------

# --------------------------------------------------------------------
# Build stage: Rocky Linux 9 builder to compile Cloudberry (release tarball)
# --------------------------------------------------------------------
FROM rockylinux/rockylinux:9.6 AS builder

# Install build toolchains and development headers (avoid coreutils/curl conflicts on arm64)
RUN dnf makecache && \
    dnf install -y \
        epel-release \
        git && \
    dnf config-manager --disable epel-cisco-openh264 && \
    dnf makecache && \
    dnf config-manager --disable epel && \
    dnf install -y --enablerepo=epel \
        the_silver_searcher \
        bat \
        htop && \
    dnf install -y \
        bison \
        cmake3 \
        ed \
        file \
        flex \
        gcc \
        gcc-c++ \
        gdb \
        glibc-langpack-en \
        glibc-locale-source \
        initscripts \
        iproute \
        less \
        lsof \
        m4 \
        net-tools \
        openssh-clients \
        openssh-server \
        perl \
        rpm-build \
        rpmdevtools \
        rsync \
        sudo \
        tar \
        unzip \
        util-linux-ng \
        wget \
        sshpass \
        which && \
    dnf install -y \
        apr-devel \
        bzip2-devel \
        java-11-openjdk \
        java-11-openjdk-devel \
        krb5-devel \
        libcurl-devel \
        libevent-devel \
        libxml2-devel \
        libuuid-devel \
        libzstd-devel \
        lz4 \
        lz4-devel \
        openldap-devel \
        openssl-devel \
        pam-devel \
        perl-ExtUtils-Embed \
        perl-Test-Simple \
        perl-core \
        python3-devel \
        python3-pytest \
        readline-devel \
        zlib-devel && \
    dnf install -y --enablerepo=crb \
        liburing-devel \
        libuv-devel \
        libyaml-devel \
        perl-IPC-Run \
        protobuf-devel && \
    dnf clean all && \
    cd && XERCES_LATEST_RELEASE=3.3.0 && \
    wget -nv "https://archive.apache.org/dist/xerces/c/3/sources/xerces-c-${XERCES_LATEST_RELEASE}.tar.gz" && \
    echo "$(curl -sL https://archive.apache.org/dist/xerces/c/3/sources/xerces-c-${XERCES_LATEST_RELEASE}.tar.gz.sha256)" | sha256sum -c - && \
    tar xf "xerces-c-${XERCES_LATEST_RELEASE}.tar.gz"; rm "xerces-c-${XERCES_LATEST_RELEASE}.tar.gz" && \
    cd xerces-c-${XERCES_LATEST_RELEASE} && \
    ./configure --prefix=/usr/local/xerces-c && \
    make -j$(nproc) && \
    make install -C ~/xerces-c-${XERCES_LATEST_RELEASE} && \
    rm -rf ~/xerces-c*

# Create gpadmin user and grant passwordless sudo in builder
RUN groupadd -r gpadmin && \
    useradd -m -r -g gpadmin -s /bin/bash gpadmin && \
    echo "gpadmin ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/gpadmin && \
    chmod 440 /etc/sudoers.d/gpadmin

# Switch to gpadmin user
USER gpadmin
WORKDIR /home/gpadmin

# Release version to build (Apache official tarball)
ARG CB_RELEASE_VERSION=2.1.0-incubating

# Download and extract the specified release version from Apache
# Using Apache mirror system for better download reliability and speed
RUN curl -L -o /home/gpadmin/apache-cloudberry-${CB_RELEASE_VERSION}-src.tar.gz \
    "https://www.apache.org/dyn/closer.lua/incubator/cloudberry/${CB_RELEASE_VERSION}/apache-cloudberry-${CB_RELEASE_VERSION}-src.tar.gz?action=download" && \
    tar -xzf /home/gpadmin/apache-cloudberry-${CB_RELEASE_VERSION}-src.tar.gz -C /home/gpadmin && \
    rm -f /home/gpadmin/apache-cloudberry-${CB_RELEASE_VERSION}-src.tar.gz && \
    mv /home/gpadmin/apache-cloudberry-${CB_RELEASE_VERSION} /home/gpadmin/cloudberry

# Build Cloudberry using the official build scripts
RUN cd /home/gpadmin/cloudberry && \
    export SRC_DIR=/home/gpadmin/cloudberry && \
    mkdir -p ${SRC_DIR}/build-logs && \
    ./devops/build/automation/cloudberry/scripts/configure-cloudberry.sh && \
    ./devops/build/automation/cloudberry/scripts/build-cloudberry.sh

# --------------------------------------------------------------------
# Runtime stage: Rocky Linux 9 runtime with required dependencies
# --------------------------------------------------------------------
FROM rockylinux/rockylinux:9.6

# Install required runtime dependencies, SSH server, sudo, and tools
# Note: Use dnf on Rocky Linux 9
RUN dnf -y update && \
    dnf -y install \
      openssh-server openssh-clients \
      sudo shadow-utils \
      bash procps-ng \
      ca-certificates \
      python3 \
      apr \
      bzip2-libs \
      krb5-libs \
      libevent \
      libicu \
      liburing \
      libuuid \
      libxml2 \
      libyaml \
      libzstd \
      lz4 \
      ncurses \
      openldap \
      openssl \
      pam \
      pcre2 \
      perl \
      protobuf \
      readline \
      zlib \
      glibc-langpack-en \
      libuv \
      iproute \
      net-tools \
      which \
      rsync \
      keyutils \
      libstdc++ && \
    dnf clean all && rm -rf /var/cache/dnf

# Create gpadmin user and group, grant passwordless sudo
RUN groupadd -r gpadmin && \
    useradd -m -r -g gpadmin -s /bin/bash gpadmin && \
    echo "gpadmin ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/gpadmin && \
    chmod 440 /etc/sudoers.d/gpadmin

# Prepare SSH daemon: generate host keys, ensure runtime dir, and allow gpadmin to start it
RUN ssh-keygen -A && mkdir -p /run/sshd && chmod u+s /usr/sbin/sshd

# Copy built Cloudberry from builder stage
COPY --from=builder /usr/local/cloudberry-db /usr/local/cloudberry-db

# Bring Xerces libs into Cloudberry lib dir
COPY --from=builder /usr/local/xerces-c/lib/libxerces-c.so /usr/local/cloudberry-db/lib/
COPY --from=builder /usr/local/xerces-c/lib/libxerces-c-3.*.so /usr/local/cloudberry-db/lib/

# Copy configuration files to their final destinations
COPY ./configs/90-cbdb-limits.conf /etc/security/limits.d/90-cbdb-limits.conf
COPY ./configs/90-cbdb-sysctl.conf /etc/sysctl.d/90-cbdb-sysctl.conf
COPY ./configs/gpinitsystem_singlenode /tmp/gpinitsystem_singlenode
COPY ./configs/gpinitsystem_multinode /tmp/gpinitsystem_multinode
COPY ./configs/multinode-gpinit-hosts /tmp/multinode-gpinit-hosts
COPY ./configs/init_system.sh /tmp/init_system.sh

# Runtime configuration
RUN echo "cdw" > /tmp/gpdb-hosts && \
    chmod 755 /tmp/gpinitsystem_singlenode && \
    chmod 755 /tmp/gpinitsystem_multinode && \
    chmod 755 /tmp/init_system.sh && \
    mkdir -p /data0/database/coordinator /data0/database/primary /data0/database/mirror && \
    chown -R gpadmin:gpadmin \
      /usr/local/cloudberry-db \
      /tmp/gpinitsystem_singlenode \
      /tmp/gpinitsystem_multinode \
      /tmp/gpdb-hosts \
      /tmp/multinode-gpinit-hosts \
      /data0 && \
    echo "export COORDINATOR_DATA_DIRECTORY=/data0/database/coordinator/gpseg-1" >> /home/gpadmin/.bashrc && \
    echo -e '\n# Add Cloudberry entries\nif [ -f /usr/local/cloudberry-db/cloudberry-env.sh ]; then\n  source /usr/local/cloudberry-db/cloudberry-env.sh\nfi\n# Add Greenplum compatibility entries\nif [ -f /usr/local/cloudberry-db/greenplum_path.sh ]; then\n  source /usr/local/cloudberry-db/greenplum_path.sh\nfi' >> /home/gpadmin/.bashrc

# ----------------------------------------------------------------------
# Generate SSH keypair for gpadmin user at build time
# ----------------------------------------------------------------------
# WARNING: This embeds a fixed SSH keypair in the Docker image for
# sandbox convenience. This is ONLY suitable for local testing and
# development. DO NOT use this image in production or any environment
# where security is a concern.
# ----------------------------------------------------------------------
RUN mkdir -p /home/gpadmin/.ssh && \
    ssh-keygen -t rsa -b 4096 -N '' -C 'gpadmin@cloudberry-sandbox' \
               -f /home/gpadmin/.ssh/id_rsa && \
    cat /home/gpadmin/.ssh/id_rsa.pub >> /home/gpadmin/.ssh/authorized_keys && \
    chmod 700 /home/gpadmin/.ssh && \
    chmod 600 /home/gpadmin/.ssh/id_rsa && \
    chmod 644 /home/gpadmin/.ssh/id_rsa.pub && \
    chmod 600 /home/gpadmin/.ssh/authorized_keys && \
    chown -R gpadmin:gpadmin /home/gpadmin/.ssh

# Set default user and working directory
USER gpadmin
WORKDIR /home/gpadmin

EXPOSE 5432 22

# cgroup mount (provided by compose/run)
VOLUME [ "/sys/fs/cgroup" ]

# Start the container by running the initialization script
CMD ["bash","-c","/tmp/init_system.sh"]