build-deb-cloudberry.yml

# --------------------------------------------------------------------
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed
# with this work for additional information regarding copyright
# ownership. The ASF licenses this file to You under the Apache
# License, Version 2.0 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy of the
# License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied. See the License for the specific language governing
# permissions and limitations under the License.
#
# --------------------------------------------------------------------
# GitHub Actions Workflow: Apache Cloudberry Build Pipeline
# --------------------------------------------------------------------
# Description:
#
#   This workflow builds, tests, and packages Apache Cloudberry on
#   Ubuntu 22.04. It ensures artifact integrity and performs installation
#   tests.
#
# Workflow Overview:
# 1. **Build Job**:
#    - Configures and builds Apache Cloudberry.
#    - Supports debug build configuration via ENABLE_DEBUG flag.
#    - Runs unit tests and verifies build artifacts.
#    - Creates DEB packages (regular and debug), source tarball
#    and additional files for dupload utility.
#    - **Key Artifacts**: DEB package, source tarball, changes and dsc files, build logs.
#
# 2. **DEB Install Test Job**:
#    - Verifies DEB integrity and installs Cloudberry.
#    - Validates successful installation.
#    - **Key Artifacts**: Installation logs, verification results.
#
# 3. **Report Job**:
#    - Aggregates job results into a final report.
#    - Sends failure notifications if any step fails.
#
# Execution Environment:
# - **Runs On**: ubuntu-22.04 with ubuntu-22.04 containers.
# - **Resource Requirements**:
#   - Disk: Minimum 20GB free space.
#   - Memory: Minimum 8GB RAM.
#   - CPU: Recommended 4+ cores.
#
# Triggers:
# - Push to `main` branch.
# - Pull requests to `main` branch.
# - Manual workflow dispatch.
#
# Container Images:
# - **Build**: `apache/incubator-cloudberry:cbdb-build-ubuntu22.04-latest`
# - **Test**: `apache/incubator-cloudberry:cbdb-test-ubuntu22.04-latest`
#
# Artifacts:
# - DEB Package           (retention: ${{ env.LOG_RETENTION_DAYS }} days).
# - Changes and DSC files (retention: ${{ env.LOG_RETENTION_DAYS }} days).
# - Source Tarball        (retention: ${{ env.LOG_RETENTION_DAYS }} days).
# - Logs and Test Results (retention: ${{ env.LOG_RETENTION_DAYS }} days).
#
# Notes:
# - Supports concurrent job execution.
# - Supports debug builds with preserved symbols.
# --------------------------------------------------------------------

name: Apache Cloudberry Debian Build

on:
  push:
    branches: [main, REL_2_STABLE]
  pull_request:
    branches: [main, REL_2_STABLE]
    types: [opened, synchronize, reopened, edited]
  workflow_dispatch:  # Manual trigger
    inputs:
      test_selection:
        description: 'Select tests to run (comma-separated). Examples: ic-good-opt-off,ic-contrib'
        required: false
        default: 'all'
        type: string
      reuse_artifacts_from_run_id:
        description: 'Reuse build artifacts from a previous run ID (leave empty to build fresh)'
        required: false
        default: ''
        type: string

# Note: Step details, logs, and artifacts require users to be logged into GitHub
# even for public repositories. This is a GitHub security feature and cannot
# be overridden by permissions.

permissions:
  # READ permissions allow viewing repository contents
  contents: read      # Required for checking out code and reading repository files

  # READ permissions for packages (Container registry, etc)
  packages: read      # Allows reading from GitHub package registry

  # WRITE permissions for actions includes read access to:
  # - Workflow runs
  # - Artifacts (requires GitHub login)
  # - Logs (requires GitHub login)
  actions: write

  # READ permissions for checks API:
  # - Step details visibility (requires GitHub login)
  # - Check run status and details
  checks: read

  # READ permissions for pull request metadata:
  # - PR status
  # - Associated checks
  # - Review states
  pull-requests: read

env:
  LOG_RETENTION_DAYS: 7
  ENABLE_DEBUG: false

jobs:

  ## ======================================================================
  ## Job: check-skip
  ## ======================================================================

  check-skip:
    runs-on: ubuntu-22.04
    outputs:
      should_skip: ${{ steps.skip-check.outputs.should_skip }}
    steps:
      - id: skip-check
        shell: bash
        env:
          EVENT_NAME: ${{ github.event_name }}
          PR_TITLE: ${{ github.event.pull_request.title || '' }}
          PR_BODY: ${{ github.event.pull_request.body || '' }}
        run: |
          # Default to not skipping
          echo "should_skip=false" >> "$GITHUB_OUTPUT"

          # Apply skip logic only for pull_request events
          if [[ "$EVENT_NAME" == "pull_request" ]]; then
            # Combine PR title and body for skip check
            MESSAGE="${PR_TITLE}\n${PR_BODY}"

            # Escape special characters using printf %s
            ESCAPED_MESSAGE=$(printf "%s" "$MESSAGE")

            echo "Checking PR title and body (escaped): $ESCAPED_MESSAGE"

            # Check for skip patterns
            if echo -e "$ESCAPED_MESSAGE" | grep -qEi '\[skip[ -]ci\]|\[ci[ -]skip\]|\[no[ -]ci\]'; then
              echo "should_skip=true" >> "$GITHUB_OUTPUT"
            fi
          else
            echo "Skip logic is not applied for $EVENT_NAME events."
          fi

      - name: Report Skip Status
        if: steps.skip-check.outputs.should_skip == 'true'
        run: |
          echo "CI Skip flag detected in PR - skipping all checks."
          exit 0

  ## ======================================================================
  ## Job: prepare-test-matrix-deb
  ## ======================================================================

  prepare-test-matrix-deb:
    runs-on: ubuntu-22.04
    needs: [check-skip]
    if: needs.check-skip.outputs.should_skip != 'true'
    outputs:
      test-matrix: ${{ steps.set-matrix.outputs.matrix }}

    steps:
      - id: set-matrix
        run: |
          echo "=== Matrix Preparation Diagnostics ==="
          echo "Event type: ${{ github.event_name }}"
          echo "Test selection input: '${{ github.event.inputs.test_selection }}'"

          # Define defaults
          DEFAULT_NUM_PRIMARY_MIRROR_PAIRS=3
          DEFAULT_ENABLE_CGROUPS=false
          DEFAULT_ENABLE_CORE_CHECK=true
          DEFAULT_PG_SETTINGS_OPTIMIZER=""

          # Define base test configurations
          ALL_TESTS='{
            "include": [
              {"test":"ic-deb-good-opt-off",
               "make_configs":["src/test/regress:installcheck-good"],
               "pg_settings":{"optimizer":"off"}
              },
              {"test":"ic-deb-good-opt-on",
               "make_configs":["src/test/regress:installcheck-good"],
               "pg_settings":{"optimizer":"on"}
              },
              {"test":"pax-ic-deb-good-opt-off",
               "make_configs":[
                "contrib/pax_storage/:pax-test",
                "contrib/pax_storage/:regress_test"
              ],
               "pg_settings":{
                 "optimizer":"off",
                 "default_table_access_method":"pax"
                }
              },
              {"test":"pax-ic-deb-good-opt-on",
               "make_configs":[
                "contrib/pax_storage/:pax-test",
                "contrib/pax_storage/:regress_test"
              ],
               "pg_settings":{
                 "optimizer":"on",
                 "default_table_access_method":"pax"
                }
              },
              {"test":"ic-deb-contrib",
               "make_configs":["contrib/auto_explain:installcheck",
                               "contrib/amcheck:installcheck",
                               "contrib/citext:installcheck",
                               "contrib/btree_gin:installcheck",
                               "contrib/btree_gist:installcheck",
                               "contrib/dblink:installcheck",
                               "contrib/dict_int:installcheck",
                               "contrib/dict_xsyn:installcheck",
                               "contrib/extprotocol:installcheck",
                               "contrib/file_fdw:installcheck",
                               "contrib/formatter_fixedwidth:installcheck",
                               "contrib/hstore:installcheck",
                               "contrib/indexscan:installcheck",
                               "contrib/pg_trgm:installcheck",
                               "contrib/indexscan:installcheck",
                               "contrib/pgcrypto:installcheck",
                               "contrib/pgstattuple:installcheck",
                               "contrib/tablefunc:installcheck",
                               "contrib/passwordcheck:installcheck",
                               "contrib/pg_buffercache:installcheck",
                               "contrib/sslinfo:installcheck"]
              },
              {"test":"ic-deb-gpcontrib",
               "make_configs":["gpcontrib/orafce:installcheck",
                               "gpcontrib/zstd:installcheck",
                               "gpcontrib/gp_sparse_vector:installcheck",
                               "gpcontrib/gp_toolkit:installcheck"]
              },
              {"test":"gpcontrib-gp-stats-collector",
               "make_configs":["gpcontrib/gp_stats_collector:installcheck"],
               "extension":"gp_stats_collector"
              },
              {"test":"ic-cbdb-parallel",
               "make_configs":["src/test/regress:installcheck-cbdb-parallel"]
              }
            ]
          }'

          # Function to apply defaults
          apply_defaults() {
            echo "$1" | jq --arg     npm "$DEFAULT_NUM_PRIMARY_MIRROR_PAIRS" \
                           --argjson ec  "$DEFAULT_ENABLE_CGROUPS" \
                           --argjson ecc "$DEFAULT_ENABLE_CORE_CHECK" \
                           --arg     opt "$DEFAULT_PG_SETTINGS_OPTIMIZER" \
              'def get_defaults:
                {
                  num_primary_mirror_pairs: ($npm|tonumber),
                  enable_cgroups: $ec,
                  enable_core_check: $ecc,
                  pg_settings: {
                    optimizer: $opt
                  }
                };
               get_defaults * .'
          }

          # Extract all valid test names from ALL_TESTS
          VALID_TESTS=$(echo "$ALL_TESTS" | jq -r '.include[].test')

          # Parse input test selection
          IFS=',' read -ra SELECTED_TESTS <<< "${{ github.event.inputs.test_selection }}"

          # Default to all tests if selection is empty or 'all'
          if [[ "${SELECTED_TESTS[*]}" == "all" || -z "${SELECTED_TESTS[*]}" ]]; then
            mapfile -t SELECTED_TESTS <<< "$VALID_TESTS"
          fi

          # Validate and filter selected tests
          INVALID_TESTS=()
          FILTERED_TESTS=()
          for TEST in "${SELECTED_TESTS[@]}"; do
            TEST=$(echo "$TEST" | tr -d '[:space:]') # Trim whitespace
            if echo "$VALID_TESTS" | grep -qw "$TEST"; then
              FILTERED_TESTS+=("$TEST")
            else
              INVALID_TESTS+=("$TEST")
            fi
          done

          # Handle invalid tests
          if [[ ${#INVALID_TESTS[@]} -gt 0 ]]; then
            echo "::error::Invalid test(s) selected: ${INVALID_TESTS[*]}"
            echo "Valid tests are: $(echo "$VALID_TESTS" | tr '\n' ', ')"
            exit 1
          fi

          # Build result JSON with defaults applied
          RESULT='{"include":['
          FIRST=true
          for TEST in "${FILTERED_TESTS[@]}"; do
            CONFIG=$(jq -c --arg test "$TEST" '.include[] | select(.test == $test)' <<< "$ALL_TESTS")
            FILTERED_WITH_DEFAULTS=$(apply_defaults "$CONFIG")
            if [[ "$FIRST" == true ]]; then
              FIRST=false
            else
              RESULT="${RESULT},"
            fi
            RESULT="${RESULT}${FILTERED_WITH_DEFAULTS}"
          done
          RESULT="${RESULT}]}"

          # Output the matrix for GitHub Actions
          echo "Final matrix configuration:"
          echo "$RESULT" | jq .

          # Fix: Use block redirection
          {
            echo "matrix<<EOF"
            echo "$RESULT"
            echo "EOF"
          } >> "$GITHUB_OUTPUT"

          echo "=== Matrix Preparation Complete ==="

  ## ======================================================================
  ## Job: build-deb
  ## ======================================================================

  build-deb:
    name: Build Apache Cloudberry DEB
    env:
      JOB_TYPE: build
    needs: [check-skip]
    runs-on: ubuntu-22.04
    timeout-minutes: 120
    if: github.event.inputs.reuse_artifacts_from_run_id == ''
    outputs:
      build_timestamp: ${{ steps.set_timestamp.outputs.timestamp }}

    container:
      image: apache/incubator-cloudberry:cbdb-build-ubuntu22.04-latest
      options: >-
        --user root
        -h cdw
        -v /usr/share:/host_usr_share
        -v /usr/local:/host_usr_local
        -v /opt:/host_opt

    steps:
      - name: Free Disk Space
        if: needs.check-skip.outputs.should_skip != 'true'
        run: |
          echo "=== Disk space before cleanup ==="
          df -h /

          # Remove pre-installed tools from host to free disk space
          rm -rf /host_opt/hostedtoolcache || true   # GitHub Actions tool cache
          rm -rf /host_usr_local/lib/android || true # Android SDK
          rm -rf /host_usr_share/dotnet || true      # .NET SDK
          rm -rf /host_opt/ghc || true               # Haskell GHC
          rm -rf /host_usr_local/.ghcup || true      # Haskell GHCup
          rm -rf /host_usr_share/swift || true       # Swift
          rm -rf /host_usr_local/share/powershell || true  # PowerShell
          rm -rf /host_usr_local/share/chromium || true    # Chromium
          rm -rf /host_usr_share/miniconda || true   # Miniconda
          rm -rf /host_opt/az || true                # Azure CLI
          rm -rf /host_usr_share/sbt || true         # Scala Build Tool

          echo "=== Disk space after cleanup ==="
          df -h /

      - name: Skip Check
        if: needs.check-skip.outputs.should_skip == 'true'
        run: |
          echo "Build skipped via CI skip flag" >> "$GITHUB_STEP_SUMMARY"
          exit 0

      - name: Set build timestamp
        id: set_timestamp  # Add an ID to reference this step
        run: |
          timestamp=$(date +'%Y%m%d_%H%M%S')
          echo "timestamp=$timestamp" | tee -a "$GITHUB_OUTPUT"  # Use GITHUB_OUTPUT for job outputs
          echo "BUILD_TIMESTAMP=$timestamp" | tee -a "$GITHUB_ENV" # Also set as environment variable

      - name: Checkout Apache Cloudberry
        uses: actions/checkout@v4
        with:
          fetch-depth: 1
          submodules: true

      - name: Cloudberry Environment Initialization
        shell: bash
        env:
          LOGS_DIR: build-logs
        run: |
          set -eo pipefail
          if ! su - gpadmin -c "/tmp/init_system.sh"; then
            echo "::error::Container initialization failed"
            exit 1
          fi

          mkdir -p "${LOGS_DIR}/details"
          chown -R gpadmin:gpadmin .
          chmod -R 755 .
          chmod 777 "${LOGS_DIR}"

          df -kh /
          rm -rf /__t/*
          df -kh /

          df -h | tee -a "${LOGS_DIR}/details/disk-usage.log"
          free -h | tee -a "${LOGS_DIR}/details/memory-usage.log"

          {
            echo "=== Environment Information ==="
            uname -a
            df -h
            free -h
            env
          } | tee -a "${LOGS_DIR}/details/environment.log"

          echo "SRC_DIR=${GITHUB_WORKSPACE}" | tee -a "$GITHUB_ENV"

      - name: Generate Build Job Summary Start
        run: |
          {
            echo "# Build Job Summary"
            echo "## Environment"
            echo "- Start Time: $(date -u +'%Y-%m-%d %H:%M:%S UTC')"
            echo "- ENABLE_DEBUG: ${{ env.ENABLE_DEBUG }}"
            echo "- OS Version: $(lsb_release -sd)"
            echo "- GCC Version: $(gcc --version | head -n1)"
          } >> "$GITHUB_STEP_SUMMARY"

      - name: Run Apache Cloudberry configure script
        shell: bash
        env:
          SRC_DIR: ${{ github.workspace }}
        run: |
          set -eo pipefail

          export BUILD_DESTINATION=${SRC_DIR}/debian/build

          chmod +x "${SRC_DIR}"/devops/build/automation/cloudberry/scripts/configure-cloudberry.sh
          if ! time su - gpadmin -c "cd ${SRC_DIR} && SRC_DIR=${SRC_DIR} ENABLE_DEBUG=${{ env.ENABLE_DEBUG }} BUILD_DESTINATION=${BUILD_DESTINATION} ${SRC_DIR}/devops/build/automation/cloudberry/scripts/configure-cloudberry.sh"; then
            echo "::error::Configure script failed"
            exit 1
          fi

      - name: Run Apache Cloudberry build script
        shell: bash
        env:
          SRC_DIR: ${{ github.workspace }}
        run: |
          set -eo pipefail

          export BUILD_DESTINATION=${SRC_DIR}/debian/build

          chmod +x "${SRC_DIR}"/devops/build/automation/cloudberry/scripts/build-cloudberry.sh
          if ! time su - gpadmin -c "cd ${SRC_DIR} && SRC_DIR=${SRC_DIR} BUILD_DESTINATION=${BUILD_DESTINATION} ${SRC_DIR}/devops/build/automation/cloudberry/scripts/build-cloudberry.sh"; then
            echo "::error::Build script failed"
            exit 1
          fi

      - name: Verify build artifacts
        shell: bash
        run: |
          set -eo pipefail

          export BUILD_DESTINATION=${SRC_DIR}/debian/build

          echo "Verifying build artifacts..."
          {
            echo "=== Build Artifacts Verification ==="
            echo "Timestamp: $(date -u)"

            if [ ! -d "${BUILD_DESTINATION}" ]; then
              echo "::error::Build artifacts directory not found"
              exit 1
            fi

            # Verify critical binaries
            critical_binaries=(
              "${BUILD_DESTINATION}/bin/postgres"
              "${BUILD_DESTINATION}/bin/psql"
            )

            echo "Checking critical binaries..."
            for binary in "${critical_binaries[@]}"; do
              if [ ! -f "$binary" ]; then
                echo "::error::Critical binary missing: $binary"
                exit 1
              fi
              if [ ! -x "$binary" ]; then
                echo "::error::Binary not executable: $binary"
                exit 1
              fi
              echo "Binary verified: $binary"
              ls -l "$binary"
            done

            # Test binary execution
            echo "Testing binary execution..."
            if ! ${BUILD_DESTINATION}/bin/postgres --version; then
              echo "::error::postgres binary verification failed"
              exit 1
            fi
            if ! ${BUILD_DESTINATION}/bin/psql --version; then
              echo "::error::psql binary verification failed"
              exit 1
            fi

            echo "All build artifacts verified successfully"
          } 2>&1 | tee -a build-logs/details/build-verification.log

      - name: Create Source tarball, create DEB and verify artifacts
        shell: bash
        env:
          CBDB_VERSION: 99.0.0
          BUILD_NUMBER: 1
          SRC_DIR: ${{ github.workspace }}
        run: |
          set -eo pipefail

          {
            echo "=== Artifact Creation Log ==="
            echo "Timestamp: $(date -u)"

            cp -r "${SRC_DIR}"/devops/build/packaging/deb/ubuntu22.04/* debian/
            chown -R "$(whoami)" debian
            chmod -x debian/*install

            # replace not supported symbols in version
            CBDB_VERSION=$(echo "$CBDB_VERSION" | sed "s/\//./g")
            CBDB_VERSION=$(echo "$CBDB_VERSION" | sed "s/_/-/g")
          
            echo "We will built ${CBDB_VERSION}"
            export BUILD_DESTINATION=${SRC_DIR}/debian/build

            if ! ${SRC_DIR}/devops/build/packaging/deb/build-deb.sh -v $CBDB_VERSION; then
              echo "::error::Build script failed"
              exit 1
            fi

            ARCH=$(dpkg --print-architecture)
            # Detect OS distribution (e.g., ubuntu22.04, debian12)
            if [ -f /etc/os-release ]; then
              . /etc/os-release
              OS_DISTRO=$(echo "${ID}${VERSION_ID}" | tr '[:upper:]' '[:lower:]')
            else
              OS_DISTRO="unknown"
            fi
            CBDB_PKG_VERSION=${CBDB_VERSION}-${BUILD_NUMBER}-${OS_DISTRO}

            echo "Produced artifacts"
            ls -l ../

            echo "Copy artifacts to subdirectory for sign/upload"
            mkdir ${SRC_DIR}/deb
            DEB_FILE="apache-cloudberry-db-incubating_${CBDB_PKG_VERSION}"_"${ARCH}".deb
            DBG_DEB_FILE="apache-cloudberry-db-incubating-dbgsym_${CBDB_PKG_VERSION}"_"${ARCH}".ddeb
            CHANGES_DEB_FILE="apache-cloudberry-db-incubating_${CBDB_PKG_VERSION}"_"${ARCH}".changes
            BUILDINFO_DEB_FILE="apache-cloudberry-db-incubating_${CBDB_PKG_VERSION}"_"${ARCH}".buildinfo
            DSC_DEB_FILE="apache-cloudberry-db-incubating_${CBDB_PKG_VERSION}".dsc
            SOURCE_FILE="apache-cloudberry-db-incubating_${CBDB_PKG_VERSION}".tar.xz
            cp ../"${DEB_FILE}" "${SRC_DIR}/deb"
            cp ../"${DBG_DEB_FILE}" "${SRC_DIR}/deb"
            cp ../"${CHANGES_DEB_FILE}" "${SRC_DIR}/deb"
            cp ../"${BUILDINFO_DEB_FILE}" "${SRC_DIR}/deb"
            cp ../"${DSC_DEB_FILE}" "${SRC_DIR}/deb"
            cp ../"${SOURCE_FILE}" "${SRC_DIR}/deb"
            mkdir "${SRC_DIR}/deb/debian"
            cp debian/changelog "${SRC_DIR}/deb/debian"

            # Get package information
            echo "Package Information:"
            dpkg --info "${SRC_DIR}/deb/${DEB_FILE}"
            dpkg --contents "${SRC_DIR}/deb/${DEB_FILE}"

            # Verify critical files in DEB
            echo "Verifying critical files in DEB..."
            for binary in "bin/postgres" "bin/psql"; do
              if ! dpkg --contents "${SRC_DIR}/deb/${DEB_FILE}" | grep -c "${binary}$"; then
                echo "::error::Critical binary '${binary}' not found in DEB"
                exit 1
              fi
            done

            # Record checksums
            echo "Calculating checksums..."
            sha256sum "${SRC_DIR}/deb/${DEB_FILE}" | tee -a build-logs/details/checksums.log

            echo "Artifacts created and verified successfully"


          } 2>&1 | tee -a build-logs/details/artifact-creation.log

      - name: Run Apache Cloudberry unittest script
        if: needs.check-skip.outputs.should_skip != 'true'
        shell: bash
        env:
          SRC_DIR: ${{ github.workspace }}
        run: |
          set -eo pipefail
          chmod +x "${SRC_DIR}"/devops/build/automation/cloudberry/scripts/unittest-cloudberry.sh
          if ! time su - gpadmin -c "cd ${SRC_DIR} && SRC_DIR=${SRC_DIR} ${SRC_DIR}/devops/build/automation/cloudberry/scripts/unittest-cloudberry.sh"; then
            echo "::error::Unittest script failed"
            exit 1
          fi

      - name: Generate Build Job Summary End
        run: |
          {
            echo "## Build Results"
            echo "- End Time: $(date -u +'%Y-%m-%d %H:%M:%S UTC')"
          } >> "$GITHUB_STEP_SUMMARY"

      - name: Upload build logs
        uses: actions/upload-artifact@v4
        with:
          name: build-logs-${{ env.BUILD_TIMESTAMP }}
          path: |
            build-logs/
          retention-days: ${{ env.LOG_RETENTION_DAYS }}

      - name: Upload Cloudberry DEB build artifacts
        uses: actions/upload-artifact@v4
        with:
          name: apache-cloudberry-db-incubating-deb-build-artifacts
          retention-days: ${{ env.LOG_RETENTION_DAYS }}
          if-no-files-found: error
          path: |
            deb/*.deb
            deb/*.ddeb

      - name: Upload Cloudberry deb source build artifacts
        uses: actions/upload-artifact@v4
        with:
          name: apache-cloudberry-db-incubating-deb-source-build-artifacts
          retention-days: ${{ env.LOG_RETENTION_DAYS }}
          if-no-files-found: error
          path: |
            deb/*.tar.xz
            deb/*.changes
            deb/*.dsc
            deb/*.buildinfo
            deb/debian/changelog

  ## ======================================================================
  ## Job: deb-install-test
  ## ======================================================================

  deb-install-test:
    name: DEB Install Test Apache Cloudberry
    needs: [check-skip, build-deb]
    if: |
      !cancelled() &&
      (needs.build-deb.result == 'success' || needs.build-deb.result == 'skipped') &&
      github.event.inputs.reuse_artifacts_from_run_id == ''
    runs-on: ubuntu-22.04
    timeout-minutes: 120

    container:
      image: apache/incubator-cloudberry:cbdb-test-ubuntu22.04-latest
      options: >-
        --user root
        -h cdw
        -v /usr/share:/host_usr_share
        -v /usr/local:/host_usr_local
        -v /opt:/host_opt

    steps:
      - name: Free Disk Space
        if: needs.check-skip.outputs.should_skip != 'true'
        run: |
          echo "=== Disk space before cleanup ==="
          df -h /

          # Remove pre-installed tools from host to free disk space
          rm -rf /host_opt/hostedtoolcache || true   # GitHub Actions tool cache
          rm -rf /host_usr_local/lib/android || true # Android SDK
          rm -rf /host_usr_share/dotnet || true      # .NET SDK
          rm -rf /host_opt/ghc || true               # Haskell GHC
          rm -rf /host_usr_local/.ghcup || true      # Haskell GHCup
          rm -rf /host_usr_share/swift || true       # Swift
          rm -rf /host_usr_local/share/powershell || true  # PowerShell
          rm -rf /host_usr_local/share/chromium || true    # Chromium
          rm -rf /host_usr_share/miniconda || true   # Miniconda
          rm -rf /host_opt/az || true                # Azure CLI
          rm -rf /host_usr_share/sbt || true         # Scala Build Tool

          echo "=== Disk space after cleanup ==="
          df -h /

      - name: Skip Check
        if: needs.check-skip.outputs.should_skip == 'true'
        run: |
          echo "DEB install test skipped via CI skip flag" >> "$GITHUB_STEP_SUMMARY"
          exit 0

      - name: Download Cloudberry DEB build artifacts
        if: needs.check-skip.outputs.should_skip != 'true'
        uses: actions/download-artifact@v4
        with:
          name: apache-cloudberry-db-incubating-deb-build-artifacts
          path: ${{ github.workspace }}/deb_build_artifacts
          run-id: ${{ github.event.inputs.reuse_artifacts_from_run_id || github.run_id }}
          merge-multiple: false

      - name: Cloudberry Environment Initialization
        if: needs.check-skip.outputs.should_skip != 'true'
        shell: bash
        env:
          LOGS_DIR: install-logs
        run: |
          set -eo pipefail
          if ! su - gpadmin -c "/tmp/init_system.sh"; then
            echo "::error::Container initialization failed"
            exit 1
          fi

          mkdir -p "${LOGS_DIR}/details"
          chown -R gpadmin:gpadmin .
          chmod -R 755 .
          chmod 777 "${LOGS_DIR}"

          df -kh /
          rm -rf /__t/*
          df -kh /

          df -h | tee -a "${LOGS_DIR}/details/disk-usage.log"
          free -h | tee -a "${LOGS_DIR}/details/memory-usage.log"

          {
            echo "=== Environment Information ==="
            uname -a
            df -h
            free -h
            env
          } | tee -a "${LOGS_DIR}/details/environment.log"

          echo "SRC_DIR=${GITHUB_WORKSPACE}" | tee -a "$GITHUB_ENV"

      - name: Verify DEB artifacts
        id: verify-artifacts
        shell: bash
        run: |
          set -eo pipefail

          DEB_FILE=$(ls "${GITHUB_WORKSPACE}"/deb_build_artifacts/*.deb)
          if [ ! -f "${DEB_FILE}" ]; then
            echo "::error::DEB file not found"
            exit 1
          fi

          echo "deb_file=${DEB_FILE}" >> "$GITHUB_OUTPUT"

          echo "Verifying DEB artifacts..."
          {
            echo "=== DEB Verification Summary ==="
            echo "Timestamp: $(date -u)"
            echo "DEB File: ${DEB_FILE}"

            # Get DEB metadata and verify contents
            echo "Package Information:"
            dpkg-deb -f "${DEB_FILE}"

            # Get key DEB attributes for verification
            DEB_VERSION=$(dpkg-deb -f "${DEB_FILE}" Version | cut -d'-' -f 1)
            DEB_RELEASE=$(dpkg-deb -f "${DEB_FILE}" Version | cut -d'-' -f 3)
            echo "version=${DEB_VERSION}" >> "$GITHUB_OUTPUT"
            echo "release=${DEB_RELEASE}" >> "$GITHUB_OUTPUT"

            # Verify expected binaries are in the DEB
            echo "Verifying critical files in DEB..."
            for binary in "bin/postgres" "bin/psql"; do
              if ! dpkg-deb -c "${DEB_FILE}" | grep "${binary}" > /dev/null; then
                echo "::error::Critical binary '${binary}' not found in DEB"
                exit 1
              fi
            done

            echo "DEB Details:"
            echo "- Version: ${DEB_VERSION}"
            echo "- Release: ${DEB_RELEASE}"

            # Calculate and store checksum
            echo "Checksum:"
            sha256sum "${DEB_FILE}"

          } 2>&1 | tee -a install-logs/details/deb-verification.log

      - name: Install Cloudberry DEB
        shell: bash
        env:
          DEB_FILE: ${{ steps.verify-artifacts.outputs.deb_file }}
          DEB_VERSION: ${{ steps.verify-artifacts.outputs.version }}
          DEB_RELEASE: ${{ steps.verify-artifacts.outputs.release }}
        run: |
          set -eo pipefail

          if [ -z "${DEB_FILE}" ]; then
            echo "::error::DEB_FILE environment variable is not set"
            exit 1
          fi

          {
            echo "=== DEB Installation Log ==="
            echo "Timestamp: $(date -u)"
            echo "DEB File: ${DEB_FILE}"
            echo "Version: ${DEB_VERSION}"
            echo "Release: ${DEB_RELEASE}"

            # Clean install location
            rm -rf /usr/local/cloudberry-db

            # Install DEB
            echo "Starting installation..."
            apt-get update
            if ! apt-get -y install "${DEB_FILE}"; then
              echo "::error::DEB installation failed"
              exit 1
            fi

            # Change ownership back to gpadmin - it is needed for future tests
            chown -R gpadmin:gpadmin /usr/local/cloudberry-db

            echo "Installation completed successfully"
            dpkg-query -s apache-cloudberry-db-incubating
            echo "Installed files:"
            dpkg-query -L apache-cloudberry-db-incubating
          } 2>&1 | tee -a install-logs/details/deb-installation.log

      - name: Upload install logs
        uses: actions/upload-artifact@v4
        with:
          name: install-logs-${{ matrix.name }}-${{ needs.build-deb.outputs.build_timestamp }}
          path: |
            install-logs/
          retention-days: ${{ env.LOG_RETENTION_DAYS }}

      - name: Generate Install Test Job Summary End
        if: always()
        shell: bash {0}
        run: |
          {
            echo "# Installed Package Summary"
            echo "\`\`\`"

            dpkg-query -s apache-cloudberry-db-incubating
            echo "\`\`\`"
          } >> "$GITHUB_STEP_SUMMARY" || true

  ## ======================================================================
  ## Job: test-deb
  ## ======================================================================

  test-deb:
    name: ${{ matrix.test }}
    needs: [check-skip, build-deb, prepare-test-matrix-deb]
    if: |
      !cancelled() &&
      (needs.build-deb.result == 'success' || needs.build-deb.result == 'skipped')
    runs-on: ubuntu-22.04
    timeout-minutes: 120
    # actionlint-allow matrix[*].pg_settings
    strategy:
      fail-fast: false  # Continue with other tests if one fails
      matrix: ${{ fromJson(needs.prepare-test-matrix-deb.outputs.test-matrix) }}

    container:
      image: apache/incubator-cloudberry:cbdb-build-ubuntu22.04-latest
      options: >-
        --privileged
        --user root
        --hostname cdw
        --shm-size=2gb
        --ulimit core=-1
        --cgroupns=host
        -v /sys/fs/cgroup:/sys/fs/cgroup:rw
        -v /usr/share:/host_usr_share
        -v /usr/local:/host_usr_local
        -v /opt:/host_opt

    steps:
      - name: Free Disk Space
        if: needs.check-skip.outputs.should_skip != 'true'
        run: |
          echo "=== Disk space before cleanup ==="
          df -h /

          # Remove pre-installed tools from host to free disk space
          rm -rf /host_opt/hostedtoolcache || true   # GitHub Actions tool cache
          rm -rf /host_usr_local/lib/android || true # Android SDK
          rm -rf /host_usr_share/dotnet || true      # .NET SDK
          rm -rf /host_opt/ghc || true               # Haskell GHC
          rm -rf /host_usr_local/.ghcup || true      # Haskell GHCup
          rm -rf /host_usr_share/swift || true       # Swift
          rm -rf /host_usr_local/share/powershell || true  # PowerShell
          rm -rf /host_usr_local/share/chromium || true    # Chromium
          rm -rf /host_usr_share/miniconda || true   # Miniconda
          rm -rf /host_opt/az || true                # Azure CLI
          rm -rf /host_usr_share/sbt || true         # Scala Build Tool

          echo "=== Disk space after cleanup ==="
          df -h /

      - name: Skip Check
        if: needs.check-skip.outputs.should_skip == 'true'
        run: |
          echo "Test ${{ matrix.test }} skipped via CI skip flag" >> "$GITHUB_STEP_SUMMARY"
          exit 0

      - name: Use timestamp from previous job
        if: needs.check-skip.outputs.should_skip != 'true'
        run: |
          echo "Timestamp from output: ${{ needs.build-deb.outputs.build_timestamp }}"

      - name: Cloudberry Environment Initialization
        shell: bash
        env:
          LOGS_DIR: build-logs
        run: |
          set -eo pipefail
          if ! su - gpadmin -c "/tmp/init_system.sh"; then
            echo "::error::Container initialization failed"
            exit 1
          fi

          mkdir -p "${LOGS_DIR}/details"
          chown -R gpadmin:gpadmin .
          chmod -R 755 .
          chmod 777 "${LOGS_DIR}"

          df -kh /
          rm -rf /__t/*
          df -kh /

          df -h | tee -a "${LOGS_DIR}/details/disk-usage.log"
          free -h | tee -a "${LOGS_DIR}/details/memory-usage.log"

          {
            echo "=== Environment Information ==="
            uname -a
            df -h
            free -h
            env
          } | tee -a "${LOGS_DIR}/details/environment.log"

          echo "SRC_DIR=${GITHUB_WORKSPACE}" | tee -a "$GITHUB_ENV"

      - name: Setup cgroups
        if: needs.check-skip.outputs.should_skip != 'true'
        shell: bash
        run: |
          set -uxo pipefail

          if [ "${{ matrix.enable_cgroups }}" = "true" ]; then

            echo "Current mounts:"
            mount | grep cgroup

            CGROUP_BASEDIR=/sys/fs/cgroup

            # 1. Basic setup with permissions
            sudo chmod -R 777 ${CGROUP_BASEDIR}/
            sudo mkdir -p ${CGROUP_BASEDIR}/gpdb
            sudo chmod -R 777 ${CGROUP_BASEDIR}/gpdb
            sudo chown -R gpadmin:gpadmin ${CGROUP_BASEDIR}/gpdb

            # 2. Enable controllers
            sudo bash -c "echo '+cpu +cpuset +memory +io' > ${CGROUP_BASEDIR}/cgroup.subtree_control" || true
            sudo bash -c "echo '+cpu +cpuset +memory +io' > ${CGROUP_BASEDIR}/gpdb/cgroup.subtree_control" || true

            # 3. CPU settings
            sudo bash -c "echo 'max 100000' > ${CGROUP_BASEDIR}/gpdb/cpu.max" || true
            sudo bash -c "echo '100' > ${CGROUP_BASEDIR}/gpdb/cpu.weight" || true
            sudo bash -c "echo '0' > ${CGROUP_BASEDIR}/gpdb/cpu.weight.nice" || true
            sudo bash -c "echo 0-$(( $(nproc) - 1 )) > ${CGROUP_BASEDIR}/gpdb/cpuset.cpus" || true
            sudo bash -c "echo '0' > ${CGROUP_BASEDIR}/gpdb/cpuset.mems" || true

            # 4. Memory settings
            sudo bash -c "echo 'max' > ${CGROUP_BASEDIR}/gpdb/memory.max" || true
            sudo bash -c "echo '0' > ${CGROUP_BASEDIR}/gpdb/memory.min" || true
            sudo bash -c "echo 'max' > ${CGROUP_BASEDIR}/gpdb/memory.high" || true

            # 5. IO settings
            echo "Available block devices:"
            lsblk

            sudo bash -c "
              if [ -f \${CGROUP_BASEDIR}/gpdb/io.stat ]; then
                echo 'Detected IO devices:'
                cat \${CGROUP_BASEDIR}/gpdb/io.stat
              fi
              echo '' > \${CGROUP_BASEDIR}/gpdb/io.max || true
            "

            # 6. Fix permissions again after all writes
            sudo chmod -R 777 ${CGROUP_BASEDIR}/gpdb
            sudo chown -R gpadmin:gpadmin ${CGROUP_BASEDIR}/gpdb

            # 7. Check required files
            echo "Checking required files:"
            required_files=(
                "cgroup.procs"
                "cpu.max"
                "cpu.pressure"
                "cpu.weight"
                "cpu.weight.nice"
                "cpu.stat"
                "cpuset.cpus"
                "cpuset.mems"
                "cpuset.cpus.effective"
                "cpuset.mems.effective"
                "memory.current"
                "io.max"
            )

            for file in "${required_files[@]}"; do
                if [ -f "${CGROUP_BASEDIR}/gpdb/$file" ]; then
                    echo "✓ $file exists"
                    ls -l "${CGROUP_BASEDIR}/gpdb/$file"
                else
                    echo "✗ $file missing"
                fi
            done

            # 8. Test subdirectory creation
            echo "Testing subdirectory creation..."
            sudo -u gpadmin bash -c "
              TEST_DIR=\${CGROUP_BASEDIR}/gpdb/test6448
              if mkdir -p \$TEST_DIR; then
                echo 'Created test directory'
                sudo chmod -R 777 \$TEST_DIR
                if echo \$\$ > \$TEST_DIR/cgroup.procs; then
                  echo 'Successfully wrote to cgroup.procs'
                  cat \$TEST_DIR/cgroup.procs
                  # Move processes back to parent before cleanup
                  echo \$\$ > \${CGROUP_BASEDIR}/gpdb/cgroup.procs
                else
                  echo 'Failed to write to cgroup.procs'
                  ls -la \$TEST_DIR/cgroup.procs
                fi
                ls -la \$TEST_DIR/
                rmdir \$TEST_DIR || {
                  echo 'Moving all processes to parent before cleanup'
                  cat \$TEST_DIR/cgroup.procs | while read pid; do
                    echo \$pid > \${CGROUP_BASEDIR}/gpdb/cgroup.procs 2>/dev/null || true
                  done
                  rmdir \$TEST_DIR
                }
              else
                echo 'Failed to create test directory'
              fi
            "

            # 9. Verify setup as gpadmin user
            echo "Testing cgroup access as gpadmin..."
            sudo -u gpadmin bash -c "
              echo 'Checking mounts...'
              mount | grep cgroup

              echo 'Checking /proc/self/mounts...'
              cat /proc/self/mounts | grep cgroup

              if ! grep -q cgroup2 /proc/self/mounts; then
                  echo 'ERROR: cgroup2 mount NOT visible to gpadmin'
                  exit 1
              fi
              echo 'SUCCESS: cgroup2 mount visible to gpadmin'

              if ! [ -w ${CGROUP_BASEDIR}/gpdb ]; then
                  echo 'ERROR: gpadmin cannot write to gpdb cgroup'
                  exit 1
              fi
              echo 'SUCCESS: gpadmin can write to gpdb cgroup'

              echo 'Verifying key files content:'
              echo 'cpu.max:'
              cat ${CGROUP_BASEDIR}/gpdb/cpu.max || echo 'Failed to read cpu.max'
              echo 'cpuset.cpus:'
              cat ${CGROUP_BASEDIR}/gpdb/cpuset.cpus || echo 'Failed to read cpuset.cpus'
              echo 'cgroup.subtree_control:'
              cat ${CGROUP_BASEDIR}/gpdb/cgroup.subtree_control || echo 'Failed to read cgroup.subtree_control'
            "

            # 10. Show final state
            echo "Final cgroup state:"
            ls -la ${CGROUP_BASEDIR}/gpdb/
            echo "Cgroup setup completed successfully"
          else
            echo "Cgroup setup skipped"
          fi

      - name: "Generate Test Job Summary Start: ${{ matrix.test }}"
        if: always()
        run: |
          {
            echo "# Test Job Summary: ${{ matrix.test }}"
            echo "## Environment"
            echo "- Start Time: $(date -u +'%Y-%m-%d %H:%M:%S UTC')"

            if [[ "${{ needs.check-skip.outputs.should_skip }}" == "true" ]]; then
              echo "## Skip Status"
              echo "✓ Test execution skipped via CI skip flag"
            else
              echo "- OS Version: $(cat /etc/redhat-release)"
            fi
          } >> "$GITHUB_STEP_SUMMARY"

      - name: Download Cloudberry DEB build artifacts
        if: needs.check-skip.outputs.should_skip != 'true'
        uses: actions/download-artifact@v4
        with:
          name: apache-cloudberry-db-incubating-deb-build-artifacts
          path: ${{ github.workspace }}/deb_build_artifacts
          merge-multiple: false
          run-id: ${{ github.event.inputs.reuse_artifacts_from_run_id || github.run_id }}
          github-token: ${{ secrets.GITHUB_TOKEN }}

      - name: Download Cloudberry Source build artifacts
        if: needs.check-skip.outputs.should_skip != 'true'
        uses: actions/download-artifact@v4
        with:
          name: apache-cloudberry-db-incubating-deb-source-build-artifacts
          path: ${{ github.workspace }}/source_build_artifacts
          merge-multiple: false
          run-id: ${{ github.event.inputs.reuse_artifacts_from_run_id || github.run_id }}
          github-token: ${{ secrets.GITHUB_TOKEN }}

      - name: Verify DEB artifacts
        if: needs.check-skip.outputs.should_skip != 'true'
        id: verify-artifacts
        shell: bash
        run: |
          set -eo pipefail

          SRC_TARBALL_FILE=$(ls "${GITHUB_WORKSPACE}"/source_build_artifacts/apache-cloudberry-db-incubating_*.tar.xz)
          if [ ! -f "${SRC_TARBALL_FILE}" ]; then
            echo "::error::SRC TARBALL file not found"
            exit 1
          fi

          echo "src_tarball_file=${SRC_TARBALL_FILE}" >> "$GITHUB_OUTPUT"

          echo "Verifying SRC TARBALL artifacts..."
          {
            echo "=== SRC TARBALL Verification Summary ==="
            echo "Timestamp: $(date -u)"
            echo "SRC TARBALL File: ${SRC_TARBALL_FILE}"

            # Calculate and store checksum
            echo "Checksum:"
            sha256sum "${SRC_TARBALL_FILE}"

          } 2>&1 | tee -a build-logs/details/src-tarball-verification.log

          DEB_FILE=$(ls "${GITHUB_WORKSPACE}"/deb_build_artifacts/*.deb)
          if [ ! -f "${DEB_FILE}" ]; then
            echo "::error::DEB file not found"
            exit 1
          fi

          echo "deb_file=${DEB_FILE}" >> "$GITHUB_OUTPUT"

          echo "Verifying DEB artifacts..."
          {
            echo "=== DEB Verification Summary ==="
            echo "Timestamp: $(date -u)"
            echo "DEB File: ${DEB_FILE}"

            # Get DEB metadata and verify contents
            echo "Package Information:"
            dpkg-deb -f "${DEB_FILE}"

            # Get key DEB attributes for verification
            DEB_VERSION=$(dpkg-deb -f "${DEB_FILE}" Version | cut -d'-' -f 1)
            DEB_RELEASE=$(dpkg-deb -f "${DEB_FILE}" Version | cut -d'-' -f 3)
            echo "version=${DEB_VERSION}" >> "$GITHUB_OUTPUT"
            echo "release=${DEB_RELEASE}" >> "$GITHUB_OUTPUT"

            # Verify expected binaries are in the DEB
            echo "Verifying critical files in DEB..."
            for binary in "bin/postgres" "bin/psql"; do
              if ! dpkg-deb -c "${DEB_FILE}" | grep "${binary}" > /dev/null; then
                echo "::error::Critical binary '${binary}' not found in DEB"
                exit 1
              fi
            done

            echo "DEB Details:"
            echo "- Version: ${DEB_VERSION}"
            echo "- Release: ${DEB_RELEASE}"

            # Calculate and store checksum
            echo "Checksum:"
            sha256sum "${DEB_FILE}"

          } 2>&1 | tee -a build-logs/details/deb-verification.log

      - name: Install Cloudberry DEB
        if: success() && needs.check-skip.outputs.should_skip != 'true'
        shell: bash
        env:
          DEB_FILE: ${{ steps.verify-artifacts.outputs.deb_file }}
          DEB_VERSION: ${{ steps.verify-artifacts.outputs.version }}
          DEB_RELEASE: ${{ steps.verify-artifacts.outputs.release }}
        run: |
          set -eo pipefail

          if [ -z "${DEB_FILE}" ]; then
            echo "::error::DEB_FILE environment variable is not set"
            exit 1
          fi

          {
            echo "=== DEB Installation Log ==="
            echo "Timestamp: $(date -u)"
            echo "DEB File: ${DEB_FILE}"
            echo "Version: ${DEB_VERSION}"
            echo "Release: ${DEB_RELEASE}"

            # Clean install location
            rm -rf /usr/local/cloudberry-db

            # Install DEB
            echo "Starting installation..."
            apt-get update
            if ! apt-get -y install "${DEB_FILE}"; then
              echo "::error::DEB installation failed"
              exit 1
            fi

            # Change ownership back to gpadmin - it is needed for future tests
            chown -R gpadmin:gpadmin /usr/local/cloudberry-db

            echo "Installation completed successfully"
            dpkg-query -s apache-cloudberry-db-incubating
            echo "Installed files:"
            dpkg-query -L apache-cloudberry-db-incubating
          } 2>&1 | tee -a build-logs/details/deb-installation.log

      - name: Extract source tarball
        if: success() && needs.check-skip.outputs.should_skip != 'true'
        shell: bash
        env:
          SRC_TARBALL_FILE: ${{ steps.verify-artifacts.outputs.src_tarball_file }}
          SRC_DIR: ${{ github.workspace }}
        run: |
          set -eo pipefail

          {
            echo "=== Source Extraction Log ==="
            echo "Timestamp: $(date -u)"

            echo "Starting extraction..."
            file "${SRC_TARBALL_FILE}"
            if ! time tar xf "${SRC_TARBALL_FILE}" -C "${SRC_DIR}"/.. ; then
              echo "::error::Source extraction failed"
              exit 1
            fi

            echo "Extraction completed successfully"
            echo "Extracted contents:"
            ls -la "${SRC_DIR}/../cloudberry"
            echo "Directory size:"
            du -sh "${SRC_DIR}/../cloudberry"
          } 2>&1 | tee -a build-logs/details/source-extraction.log

      - name: Prepare DEB Environment
        if: success() && needs.check-skip.outputs.should_skip != 'true'
        shell: bash
        env:
          SRC_DIR: ${{ github.workspace }}
        run: |
          set -eo pipefail

          {

            # change ownership to gpadmin
            chown -R gpadmin "${SRC_DIR}/../cloudberry"
            touch build-logs/sections.log
            chown gpadmin build-logs/sections.log
            chmod 777 build-logs

            # configure link lib directory to temporary location, fix it
            rm -rf "${SRC_DIR}"/debian/build/lib
            ln -sf /usr/cloudberry-db/lib "${SRC_DIR}"/debian/build/lib

            # check if regress.so exists in src directory - it is needed for contrib/dblink tests
            if [ ! -f ${SRC_DIR}/src/test/regress/regress.so ]; then
                ln -sf /usr/cloudberry-db/lib/postgresql/regress.so ${SRC_DIR}/src/test/regress/regress.so
            fi

            # FIXME
            # temporary install gdb - delete after creating new docker build/test contaners
            apt-get update
            apt-get -y install gdb

          } 2>&1 | tee -a build-logs/details/prepare-deb-env.log

      - name: Create Apache Cloudberry demo cluster
        if: success() && needs.check-skip.outputs.should_skip != 'true'
        shell: bash
        env:
          SRC_DIR: ${{ github.workspace }}
        run: |
          set -eo pipefail

          {
            chmod +x "${SRC_DIR}"/devops/build/automation/cloudberry/scripts/create-cloudberry-demo-cluster.sh

            # Build BLDWRAP_POSTGRES_CONF_ADDONS for shared_preload_libraries if specified
            EXTRA_CONF=""
            if [[ -n "${{ matrix.shared_preload_libraries }}" ]]; then
              EXTRA_CONF="shared_preload_libraries='${{ matrix.shared_preload_libraries }}'"
              echo "Adding shared_preload_libraries: ${{ matrix.shared_preload_libraries }}"
            fi

            if ! time su - gpadmin -c "cd ${SRC_DIR} && NUM_PRIMARY_MIRROR_PAIRS='${{ matrix.num_primary_mirror_pairs }}' BLDWRAP_POSTGRES_CONF_ADDONS=\"${EXTRA_CONF}\" SRC_DIR=${SRC_DIR} ${SRC_DIR}/devops/build/automation/cloudberry/scripts/create-cloudberry-demo-cluster.sh"; then
              echo "::error::Demo cluster creation failed"
              exit 1
            fi

          } 2>&1 | tee -a build-logs/details/create-cloudberry-demo-cluster.log

      - name: "Run Tests: ${{ matrix.test }}"
        if: success() && needs.check-skip.outputs.should_skip != 'true'
        env:
          SRC_DIR: ${{ github.workspace }}
          BUILD_DESTINATION: ${{ github.workspace }}/debian/build
        shell: bash {0}
        run: |
          set -o pipefail

          # Initialize test status
          overall_status=0

          # Create logs directory structure
          mkdir -p build-logs/details

          # Core file config
          mkdir -p "/tmp/cloudberry-cores"
          chmod 1777 "/tmp/cloudberry-cores"
          sysctl -w kernel.core_pattern="/tmp/cloudberry-cores/core-%e-%s-%u-%g-%p-%t"
          sysctl kernel.core_pattern
          su - gpadmin -c "ulimit -c"

          # WARNING: PostgreSQL Settings
          # When adding new pg_settings key/value pairs:
          # 1. Add a new check below for the setting
          # 2. Follow the same pattern as optimizer
          # 3. Update matrix entries to include the new setting


          # Create extension if required
          if [[ "${{ matrix.extension != '' }}" == "true" ]]; then
            case "${{ matrix.extension }}" in
              gp_stats_collector)
                if ! su - gpadmin -c "source ${BUILD_DESTINATION}/cloudberry-env.sh && \
                  source ${SRC_DIR}/gpAux/gpdemo/gpdemo-env.sh && \
                  gpconfig -c shared_preload_libraries -v 'gp_stats_collector' && \
                  gpstop -ra && \
                  echo 'CREATE EXTENSION IF NOT EXISTS gp_stats_collector; \
                        SHOW shared_preload_libraries; \
                        TABLE pg_extension;' | \
                    psql postgres"
                then
                    echo "Error creating gp_stats_collector extension"
                    exit 1
                fi
                ;;
              *)
                echo "Unknown extension: ${{ matrix.extension }}"
                exit 1
                ;;
            esac
          fi

          # Set PostgreSQL options if defined
          PG_OPTS=""
          if [[ "${{ matrix.pg_settings.optimizer != '' }}" == "true" ]]; then
            PG_OPTS="$PG_OPTS -c optimizer=${{ matrix.pg_settings.optimizer }}"
          fi

          if [[ "${{ matrix.pg_settings.default_table_access_method != '' }}" == "true" ]]; then
            PG_OPTS="$PG_OPTS -c default_table_access_method=${{ matrix.pg_settings.default_table_access_method }}"
          fi

          # Read configs into array
          IFS=' ' read -r -a configs <<< "${{ join(matrix.make_configs, ' ') }}"

          echo "=== Starting test execution for ${{ matrix.test }} ==="
          echo "Number of configurations to execute: ${#configs[@]}"
          echo ""

          # Execute each config separately
          for ((i=0; i<${#configs[@]}; i++)); do
            config="${configs[$i]}"
            IFS=':' read -r dir target <<< "$config"

            echo "=== Executing configuration $((i+1))/${#configs[@]} ==="
            echo "Make command: make -C $dir $target"
            echo "Environment:"
            echo "- PGOPTIONS: ${PG_OPTS}"

            # Create unique log file for this configuration
            config_log="build-logs/details/make-${{ matrix.test }}-config$i.log"

            # Clean up any existing core files
            echo "Cleaning up existing core files..."
            rm -f /tmp/cloudberry-cores/core-*

            # Execute test script with proper environment setup
            if ! time su - gpadmin -c "cd ${SRC_DIR} && \
                 MAKE_NAME='${{ matrix.test }}-config$i' \
                 MAKE_TARGET='$target' \
                 MAKE_DIRECTORY='-C $dir' \
                 PGOPTIONS='${PG_OPTS}' \
                 SRC_DIR='${SRC_DIR}' \
                 ${SRC_DIR}/devops/build/automation/cloudberry/scripts/test-cloudberry.sh" \
                 2>&1 | tee "$config_log"; then
              echo "::warning::Test execution failed for configuration $((i+1)): make -C $dir $target"
              overall_status=1
            fi

            # Check for results directory
            results_dir="${dir}/results"

            if [[ -d "$results_dir" ]]; then
              echo "-----------------------------------------" | tee -a build-logs/details/make-${{ matrix.test }}-config$i-results.log
              echo "Found results directory: $results_dir" | tee -a build-logs/details/make-${{ matrix.test }}-config$i-results.log
              echo "Contents of results directory:" | tee -a build-logs/details/make-${{ matrix.test }}-config$i-results.log

              find "$results_dir" -type f -ls >> "$log_file" 2>&1 | tee -a build-logs/details/make-${{ matrix.test }}-config$i-results.log
              echo "-----------------------------------------" | tee -a build-logs/details/make-${{ matrix.test }}-config$i-results.log
            else
              echo "-----------------------------------------"
              echo "Results directory $results_dir does not exit"
              echo "-----------------------------------------"
            fi

            # Analyze any core files generated by this test configuration
            echo "Analyzing core files for configuration ${{ matrix.test }}-config$i..."
            test_id="${{ matrix.test }}-config$i"

            # List the cores directory
            echo "-----------------------------------------"
            echo "Cores directory: /tmp/cloudberry-cores"
            echo "Contents of cores directory:"
            ls -Rl "/tmp/cloudberry-cores"
            echo "-----------------------------------------"

            "${SRC_DIR}"/devops/build/automation/cloudberry/scripts/analyze_core_dumps.sh "$test_id"
            core_analysis_rc=$?
            case "$core_analysis_rc" in
              0) echo "No core dumps found for this configuration" ;;
              1) echo "Core dumps were found and analyzed successfully" ;;
              2) echo "::warning::Issues encountered during core dump analysis" ;;
              *) echo "::error::Unexpected return code from core dump analysis: $core_analysis_rc" ;;
            esac

            echo "Log file: $config_log"
            echo "=== End configuration $((i+1)) execution ==="
            echo ""
          done

          echo "=== Test execution completed ==="
          echo "Log files:"
          ls -l build-logs/details/

          # Store number of configurations for parsing step
          echo "NUM_CONFIGS=${#configs[@]}" >> "$GITHUB_ENV"

          # Report overall status
          if [ $overall_status -eq 0 ]; then
            echo "All test executions completed successfully"
          else
            echo "::warning::Some test executions failed, check individual logs for details"
          fi

          exit $overall_status

      - name: "Parse Test Results: ${{ matrix.test }}"
        id: test-results
        if: always() && needs.check-skip.outputs.should_skip != 'true'
        env:
          SRC_DIR: ${{ github.workspace }}
        shell: bash {0}
        run: |
          set -o pipefail

          overall_status=0

          # Get configs array to create context for results
          IFS=' ' read -r -a configs <<< "${{ join(matrix.make_configs, ' ') }}"

          echo "=== Starting results parsing for ${{ matrix.test }} ==="
          echo "Number of configurations to parse: ${#configs[@]}"
          echo ""

          # Parse each configuration's results independently
          for ((i=0; i<NUM_CONFIGS; i++)); do
            config="${configs[$i]}"
            IFS=':' read -r dir target <<< "$config"

            config_log="build-logs/details/make-${{ matrix.test }}-config$i.log"

            echo "=== Parsing results for configuration $((i+1))/${NUM_CONFIGS} ==="
            echo "Make command: make -C $dir $target"
            echo "Log file: $config_log"

            if [ ! -f "$config_log" ]; then
              echo "::error::Log file not found: $config_log"
              {
                echo "MAKE_COMMAND=make -C $dir $target"
                echo "STATUS=missing_log"
                echo "TOTAL_TESTS=0"
                echo "FAILED_TESTS=0"
                echo "PASSED_TESTS=0"
                echo "IGNORED_TESTS=0"
              } > "test_results.$i.txt"
              overall_status=1
              continue
            fi

            # Parse this configuration's results

            MAKE_NAME="${{ matrix.test }}-config$i" \
            "${SRC_DIR}"/devops/build/automation/cloudberry/scripts/parse-test-results.sh "$config_log"
            status_code=$?

            {
                echo "SUITE_NAME=${{ matrix.test }}"
                echo "DIR=${dir}"
                echo "TARGET=${target}"
            } >> test_results.txt

            # Process return code
            case $status_code in
              0)  # All tests passed
                  echo "All tests passed successfully"
                  if [ -f test_results.txt ]; then
                    (echo "MAKE_COMMAND=\"make -C $dir $target\""; cat test_results.txt) | tee "test_results.${{ matrix.test }}.$i.txt"
                    rm test_results.txt
                  fi
                  ;;
              1)  # Tests failed but parsed successfully
                  echo "Test failures detected but properly parsed"
                  if [ -f test_results.txt ]; then
                    (echo "MAKE_COMMAND=\"make -C $dir $target\""; cat test_results.txt) | tee "test_results.${{ matrix.test }}.$i.txt"
                    rm test_results.txt
                  fi
                  overall_status=1
                  ;;
              2)  # Parse error or missing file
                  echo "::warning::Could not parse test results properly for configuration $((i+1))"
                  {
                    echo "MAKE_COMMAND=\"make -C $dir $target\""
                    echo "STATUS=parse_error"
                    echo "TOTAL_TESTS=0"
                    echo "FAILED_TESTS=0"
                    echo "PASSED_TESTS=0"
                    echo "IGNORED_TESTS=0"
                  } | tee "test_results.${{ matrix.test }}.$i.txt"
                  overall_status=1
                  ;;
              *)  # Unexpected error
                  echo "::warning::Unexpected error during test results parsing for configuration $((i+1))"
                  {
                    echo "MAKE_COMMAND=\"make -C $dir $target\""
                    echo "STATUS=unknown_error"
                    echo "TOTAL_TESTS=0"
                    echo "FAILED_TESTS=0"
                    echo "PASSED_TESTS=0"
                    echo "IGNORED_TESTS=0"
                  } | tee "test_results.${{ matrix.test }}.$i.txt"
                  overall_status=1
                  ;;
            esac

            echo "Results stored in test_results.$i.txt"
            echo "=== End parsing for configuration $((i+1)) ==="
            echo ""
          done

          # Report status of results files
          echo "=== Results file status ==="
          echo "Generated results files:"
          for ((i=0; i<NUM_CONFIGS; i++)); do
            if [ -f "test_results.${{ matrix.test }}.$i.txt" ]; then
              echo "- test_results.${{ matrix.test }}.$i.txt exists"
              echo ""
            else
              echo "::error::Missing results file: test_results.${{ matrix.test }}.$i.txt"
              overall_status=1
            fi
          done

          exit $overall_status

      - name: Check and Display Regression Diffs
        if: always()
        run: |
          # Search for regression.diffs recursively
          found_file=$(find . -type f -name "regression.diffs" | head -n 1)
          if [[ -n "$found_file" ]]; then
            echo "Found regression.diffs at: $found_file"
            cat "$found_file"
          else
            echo "No regression.diffs file found in the hierarchy."
          fi

      - name: "Check for Core Dumps Across All Configurations: ${{ matrix.test }}"
        if: always() && needs.check-skip.outputs.should_skip != 'true'
        shell: bash {0}
        run: |
          # Look for any core analysis files from this test matrix entry
          core_files=$(find "${SRC_DIR}/build-logs" -name "core_analysis_*.log")

          if [ -n "$core_files" ]; then
            echo "::error::Core dumps were found during test execution:"
            echo "$core_files" | while read -r file; do
              echo "Core analysis file: $file"
              echo "=== Content ==="
              cat "$file"
              echo "=============="
            done
            if [ "${{ matrix.enable_core_check }}" = "true" ]; then
              exit 1
            else
              echo "::warning::Special case - core checks will generate a warning"
            fi
          else
            echo "No core dumps were found during test execution"
          fi

      - name: "Generate Test Job Summary End: ${{ matrix.test }}"
        if: always()
        shell: bash {0}
        run: |
          {
            if [[ "${{ needs.check-skip.outputs.should_skip }}" == "true" ]]; then
              echo "## Test Results - SKIPPED"
              echo "- End Time: $(date -u +'%Y-%m-%d %H:%M:%S UTC')"
              exit 0
            fi

            echo "## Test Results"
            echo "- End Time: $(date -u +'%Y-%m-%d %H:%M:%S UTC')"

            # Check if job was cancelled
            if [[ "${{ job.status }}" == "cancelled" ]]; then
              echo "### Test Status"
              echo "🚫 Test execution was cancelled"
              echo ""
              echo "### Execution Summary"
              echo "Test run was interrupted and did not complete. No test results are available."
              exit 0
            fi

            # Check for core analysis files
            core_files=$(find "${SRC_DIR}/build-logs" -name "core_analysis_*.log")

            if [ -n "$core_files" ]; then
              if [ "${{ matrix.enable_core_check }}" = "true" ]; then
                echo "❌ Core dumps were detected"
              else
                echo "⚠️  Core dumps were detected - enable_core_check: false"
              fi
              echo ""
              echo "#### Core Analysis Files"
              echo "\`\`\`"
              echo "$core_files"
              echo "\`\`\`"

              echo ""
              echo "#### Analysis Details"
              echo "\`\`\`"
              while read -r file; do
                echo "=== $file ==="
                cat "$file"
                echo ""
              done <<< "$core_files"
              echo "\`\`\`"
            else
              echo "✅ No core dumps detected"
            fi

            # Process results for each configuration
            IFS=' ' read -r -a configs <<< "${{ join(matrix.make_configs, ' ') }}"

            for ((i=0; i<NUM_CONFIGS; i++)); do
              config="${configs[$i]}"
              IFS=':' read -r dir target <<< "$config"

              echo "### Configuration $((i+1)): \`make -C $dir $target\`"

              if [[ ! -f "test_results.${{ matrix.test }}.$i.txt" ]]; then
                echo "⚠️ No results file found for this configuration"
                continue
              fi

              # Source configuration results
              # shellcheck source=/dev/null
              . "test_results.${{ matrix.test }}.$i.txt"

              # Rest of the code remains the same...
              # Display status with emoji
              echo "#### Status"
              case "${STATUS:-unknown}" in
                passed)
                  echo "✅ All tests passed"
                  ;;
                failed)
                  echo "❌ Some tests failed"
                  ;;
                parse_error)
                  echo "⚠️ Could not parse test results"
                  ;;
                unknown_error)
                  echo "⚠️ Unexpected error during test execution/parsing"
                  ;;
                missing_log)
                  echo "⚠️ Test log file missing"
                  ;;
                *)
                  echo "⚠️ Unknown status: ${status:-unknown}"
                  ;;
              esac

              echo ""
              echo "#### Test Counts"
              echo "| Metric | Count |"
              echo "|--------|-------|"
              echo "| Total Tests | ${TOTAL_TESTS:-0} |"
              echo "| Passed Tests | ${PASSED_TESTS:-0} |"
              echo "| Failed Tests | ${FAILED_TESTS:-0} |"
              echo "| Ignored Tests | ${IGNORED_TESTS:-0} |"

              # Add failed tests if any
              if [[ -n "${FAILED_TEST_NAMES:-}" && "${FAILED_TESTS:-0}" != "0" ]]; then
                echo ""
                echo "#### Failed Tests"
                echo "${FAILED_TEST_NAMES}" | tr ',' '\n' | while read -r test; do
                  if [[ -n "$test" ]]; then
                    echo "* \`${test}\`"
                  fi
                done
              fi

              # Add ignored tests if any
              if [[ -n "${IGNORED_TEST_NAMES:-}" && "${IGNORED_TESTS:-0}" != "0" ]]; then
                echo ""
                echo "#### Ignored Tests"
                echo "${IGNORED_TEST_NAMES}" | tr ',' '\n' | while read -r test; do
                  if [[ -n "$test" ]]; then
                    echo "* \`${test}\`"
                  fi
                done
              fi

              echo ""
              echo "---"
            done

          } >> "$GITHUB_STEP_SUMMARY" || true

      - name: Upload test logs
        if: always()
        uses: actions/upload-artifact@v4
        with:
          name: test-logs-${{ matrix.test }}-${{ needs.build-deb.outputs.build_timestamp }}
          path: |
            build-logs/
          retention-days: ${{ env.LOG_RETENTION_DAYS }}

      - name: Upload Test Metadata
        if: always()
        uses: actions/upload-artifact@v4
        with:
          name: test-metadata-${{ matrix.test }}
          path: |
            test_results*.txt
          retention-days: ${{ env.LOG_RETENTION_DAYS }}

      - name: Upload test results files
        uses: actions/upload-artifact@v4
        with:
          name: results-${{ matrix.test }}-${{ needs.build-deb.outputs.build_timestamp }}
          path: |
            **/regression.out
            **/regression.diffs
            **/results/
          retention-days: ${{ env.LOG_RETENTION_DAYS }}

      - name: Upload test regression logs
        if: failure() || cancelled()
        uses: actions/upload-artifact@v4
        with:
          name: regression-logs-${{ matrix.test }}-${{ needs.build-deb.outputs.build_timestamp }}
          path: |
            **/regression.out
            **/regression.diffs
            **/results/
            gpAux/gpdemo/datadirs/standby/log/
            gpAux/gpdemo/datadirs/qddir/demoDataDir-1/log/
            gpAux/gpdemo/datadirs/dbfast1/demoDataDir0/log/
            gpAux/gpdemo/datadirs/dbfast2/demoDataDir1/log/
            gpAux/gpdemo/datadirs/dbfast3/demoDataDir2/log/
            gpAux/gpdemo/datadirs/dbfast_mirror1/demoDataDir0/log/
            gpAux/gpdemo/datadirs/dbfast_mirror2/demoDataDir1/log/
            gpAux/gpdemo/datadirs/dbfast_mirror3/demoDataDir2/log/
          retention-days: ${{ env.LOG_RETENTION_DAYS }}

  ## ======================================================================
  ## Job: report-deb
  ## ======================================================================

  report-deb:
    name: Generate Apache Cloudberry Build Report
    needs: [check-skip, build-deb, prepare-test-matrix-deb, deb-install-test, test-deb]
    if: always()
    runs-on: ubuntu-22.04
    steps:
      - name: Generate Final Report
        run: |
          {
            echo "# Apache Cloudberry Build Pipeline Report"

            if [[ "${{ needs.check-skip.outputs.should_skip }}" == "true" ]]; then
              echo "## CI Skip Status"
              echo "✅ CI checks skipped via skip flag"
              echo "- Completion Time: $(date -u +'%Y-%m-%d %H:%M:%S UTC')"
            else
              echo "## Job Status"
              echo "- Build Job: ${{ needs.build-deb.result }}"
              echo "- Test Job: ${{ needs.test-deb.result }}"
              echo "- Completion Time: $(date -u +'%Y-%m-%d %H:%M:%S UTC')"

              if [[ "${{ needs.build-deb.result }}" == "success" && "${{ needs.test-deb.result }}" == "success" ]]; then
                echo "✅ Pipeline completed successfully"
              else
                echo "⚠️ Pipeline completed with failures"

                if [[ "${{ needs.build-deb.result }}" != "success" ]]; then
                  echo "### Build Job Failure"
                  echo "Check build logs for details"
                fi

                if [[ "${{ needs.test-deb.result }}" != "success" ]]; then
                  echo "### Test Job Failure"
                  echo "Check test logs and regression files for details"
                fi
              fi
            fi
          } >> "$GITHUB_STEP_SUMMARY"

      - name: Notify on failure
        if: |
          needs.check-skip.outputs.should_skip != 'true' &&
          (needs.build-deb.result != 'success' || needs.test-deb.result != 'success')
        run: |
          echo "::error::Build/Test pipeline failed! Check job summaries and logs for details"
          echo "Timestamp: $(date -u +'%Y-%m-%d %H:%M:%S UTC')"
          echo "Build Result: ${{ needs.build-deb.result }}"
          echo "Test Result: ${{ needs.test-deb.result }}"